Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CARSTIN BRANDS, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of CARSTIN BRANDS, INC. in 520 EAST 2ND STREET, ARTHUR, IL 61911 (NAICS 423320). OSHA activity number 339757502.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Carstin Brands, INC. — free Get an email when a new federal OSHA severe-injury report for Carstin Brands, INC. is published. One employer, no account, unsubscribe in one click.
Site address
520 EAST 2ND STREET
City
ARTHUR
State
IL
ZIP
61911
Mailing
P.O. BOX 285, ARTHUR, IL 61911
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423320
Employees
95
Ownership type
A

4 citations on file for this inspection.

1910.106 E06 II

Serious Gravity 5 1 instance 50 exposed
Issued
Jul 23, 2014
Abate by
Aug 11, 2014
Penalty
Initial $2,800 · Current $1,960 Reduced
29 CFR 1910.106(e)(6)(ii): Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), were dispensed into containers without the nozzle and container being electrically interconnected.  Employees dispensed Acetone and other flammable liquids from large metal drums into metal Justrite containers for use in the production area and the dispensing nozzle and containers were not electrically interconnected during dispensing.
Recent events (2)
  • — I (S) $1960
  • — Z (S) $2800

1910.134 A02

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 23, 2014
Abate by
Sep 9, 2014
Penalty
Initial $4,200 · Current $2,940 Reduced

Hazardous substances 9130

29 CFR 1910.134(a)(2): The employer did not establish and maintain a respiratory protection program which included the requirements outlined in 29 CFR 1910.134(c):  Employee(s) were exposed to an airborne concentration of Particulates Not Otherwise Regulated - Respirable Fraction  excess of the 8 hour Time Weighted Average concentration of 5mg/m3 and the employer had not established and maintained a respiratory protection program
Recent events (2)
  • — I (S) $2940
  • — Z (S) $4200

1910.1000 A02

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 23, 2014
Abate by
Feb 28, 2015
Penalty
Initial $0 · Current $0

Hazardous substances 9130

29 CFR 1910.1000(a)(2): Employee(s) were exposed to an airborne concentration of Particulates Not Otherwise Regulated - Respirable Fraction listed in Table Z-1 in excess of the 8 hour Time Weighted Average concentration of 5mg/m3.  A sanding employee in the sanding area on 06/17/2014 was exposed to Particulates Not Otherwise Regulated - Respirable Fraction at an 8-hr time-weighted average level of 6.1 mg/m3, approximately 1.2 times the limit of 5 mg/m3; this limit established to prevent respiratory illness and other illnesses. The exposure level is derived from two samples collected over a 409 minute period.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1000 E

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 23, 2014
Abate by
Feb 28, 2015
Penalty
Initial $0 · Current $0

Hazardous substances 9130

29 CFR 1910.1000(e): Feasible administrative or engineering controls were not determined and implemented to achieve compliance with the limits prescribed in 29 CFR 1910.1000(a) through (d):  Employees engaged in sanding of cultured marble products was exposed to Particulates Not Otherwise Regulated - Respirable Fraction in excess of the permissible exposure limit and all feasible administrative and/or engineering controls were not implemented.  General methods of control applicable in these circumstances include, but are not limited to, the following:       a) Increased ventilation in the sanding hut area including local exhaust ventilation.         b) An employee rotation program to reduce time of exposure.       c) Modification of the water system to reduce dust.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Carstin Brands, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339757502.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.