Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: IS ENTERPRISES, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of IS ENTERPRISES, INC. in 435 R ST., NW, WASHINGTON, DC 20001 (NAICS 236118). OSHA activity number 339795361.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch IS Enterprises, INC. — free Get an email when a new federal OSHA severe-injury report for IS Enterprises, INC. is published. One employer, no account, unsubscribe in one click.
Site address
435 R ST., NW
City
WASHINGTON
State
DC
ZIP
20001
Mailing
1324 H ST., NE, WASHINGTON, DC 20002
Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236118
Employees
15
Ownership type
A

7 citations on file for this inspection.

1926.21 B02

Serious Gravity 5 1 instance 3 exposed
Issued
Jul 30, 2014
Abate by
Sep 16, 2014
Penalty
Initial $2,000 · Current $1,300 Reduced
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury:    a) Employees were observed using electrical equipment in an inappropriate manner and being exposed to fall hazards, on or about 6/4/14.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $1300
  • — Z (S) $2000

1926.454 A

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 30, 2014
Abate by
Sep 16, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.  a) Employees were on a tubular welded frame scaffold without proper guarding, exposing them to fall hazards, on or about 6/3/14.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.503 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 30, 2014
Abate by
Sep 16, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a) Employees were working from a deck without fall protection exposed to fall hazards, on or about 6/4/14.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.403 D01

Repeat Gravity 1 1 instance 2 exposed
Issued
Jul 30, 2014
Abate by
Aug 5, 2014
Penalty
Initial $2,400 · Current $2,040 Reduced
29 CFR 1926.403(d)(1): Electric equipment was not firmly secured to the surface on which it was mounted:    a) Employees were using a quad outlet box as an extension cord which was un-mounted exposing them to electrical hazards, on or about 06/4/14.     The IS Enterprises, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.403(d)(1), which was contained in OSHA inspection number 314924531, citation number 1,item number 5b and was affirmed as a final order on 11/22/10, with respect to a workplace located at 2839 Myrtle Ave., NE, Washington, DC, 20018.     Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records
Recent events (2)
  • — I (R) $2040
  • — Z (R) $2400

1926.451 G01

Repeat Gravity 10 1 instance 1 exposed
Issued
Jul 30, 2014
Abate by
Aug 5, 2014
Penalty
Initial $5,600 · Current $4,480 Reduced
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:    a) An employee was on the South side tubular welded frame scaffold which was not fully guarded exposing the employee to a fall hazard of 15 feet 8 inches, on or about 6/3/14.    The IS Enterprises, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.451(g)(1), which was contained in OSHA inspection number 912836, citation number 1,item number 3 and was affirmed as a final order on 07/26/13, with respect to a workplace located at 451 S Street, NW, Washington, DC, 20001.    Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
  • — I (R) $4480
  • — Z (R) $5600

1926.501 B13

Serious Gravity 10 1 instance 2 exposed
Issued
Jul 30, 2014
Abate by
Aug 5, 2014
Penalty
Initial $5,600 · Current $1,960 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):    a) Employees on the second floor North side deck were exposed to a fall hazard of 12 feet 8 inches, on or about 06/04/14.    b) An employee on the South side of the structure was exposed to a fall hazard of 6 feet 8 inches into a hole, on or about 6/4/14.    c) Employees were exposed to a tripping hazard from a floor hole 2 inches deep and 7 inches wide in the East side second floor stairwell, on or about 6/4/14.     The IS Enterprises, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(13), which was contained in OSHA inspection number 912836, citation number 1,item number 4 and was affirmed as a final order on 07/26/13, with respect to a workplace located at 451 S Street, NW, Washington, DC, 20001.    Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
  • — I (S) $1960
  • — Z (R) $5600

1926.405 B02

Other-than-serious 1 instance 1 exposed
Issued
Jul 30, 2014
Abate by
Aug 5, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.405(b)(2): In energized installations, each outlet box did not have a cover, faceplate, or fixture canopy:  a) Employees were exposed to an uncovered outlet in the parking area exposing them to fire hazards, on or about 6/4/14.   Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View IS Enterprises, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339795361.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.