OSHA Inspection: SUMMIT DESIGN + BUILD, LLC

Issued

2014-10-02 00:00:00

Abate by

2014-10-08 00:00:00

Penalty

Initial $3500.00 · Current $2000.00 Reduced

General-duty citation text

29 CFR 1926.502(b)(9): Top rails and midrails shall be at least one-quarter inch (0.6 cm) nominal diameter or thickness to prevent cuts and lacerations. If wire rope is used for top rails, it shall be flagged at not more than 6-foot intervals with high-visibility material.    a.  On or about June 7, 2014 - at the above addressed jobsite, the wire rope used for top rails on the roof was not flagged with high-visibility material, thereby exposing employees and subcontractor employees to falls.

Issued

2014-10-02 00:00:00

Abate by

2014-10-08 00:00:00

Penalty

Initial $4900.00 · Current $4900.00

General-duty citation text

29 CFR 1926.502(i)(3): All covers shall be secured when installed so as to prevent accidental displacement by the wind, equipment, or employees.  a.  On or about June 7, 2014 - at the above addressed jobsite, on the roof, plywood used to cover floor holes was not secured as to prevent accidental displacement, thereby exposing employees and subcontractor employees to falls.

Issued

2014-10-02 00:00:00

Abate by

2014-10-08 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.502(i)(4): All covers shall be color coded or they shall be marked with the word "HOLE" or "COVER" to provide warning of the hazard.  a. On or about June 7, 2014 - at the above addressed jobsite, on the roof, hole covers were not marked with the word "HOLE" or "COVER" to provide warning of the hazard, thereby exposing employees and subcontractor employees to falls.