BINGHAMTON, NY ·
OSHA Inspection: BINGHAMTON PRECAST & SUPPLY CORP.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BINGHAMTON PRECAST & SUPPLY CORP. in 18 PHELPS STREET, BINGHAMTON, NY 13901 (NAICS 327332). OSHA activity number 339819617.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BINGHAMTON PRECAST & SUPPLY CORP.
- Site address
- 18 PHELPS STREET
- City
- BINGHAMTON
- State
- NY
- ZIP
- 13901
- Mailing
- 18 PHELPS STREET, BINGHAMTON, NY 13901
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327332
- Employees
- 86
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.22 A01
- Issued
- Jul 22, 2014
- Abate by
- Aug 14, 2014
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): Place(s) of employment were not kept clean: a) Fab Shop, on or about 6/20/14: Explosive Wood Dust (Class II) build up was observed all over the floor near the Compound Radial Arm Saw and the Jet Table Saw.
Recent events (2)
- · I (S) $1470
- · Z (S) $2100
1910.157 G02
- Issued
- Jul 22, 2014
- Abate by
- Aug 14, 2014
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.157(g)(2): The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting was not provided to all employees upon initial employment, and at least annually thereafter: a) Throughout the facility, on or about 6/20/14: Training was not provided to employees on the use of fire extinguishers and the hazards involved with incipient stage fire fighting. * ABATEMENT NOTE: By this date the employer must either correct the alleged violation or implement a Fire Safety Policy; as outlined in 29 CFR 1910.38(a) and .39 which includes the evacuation requirements of 29 CFR 1910.157(b).
Recent events (2)
- · I (S) $1470
- · Z (S) $2100
1910.212 A01
- Issued
- Jul 22, 2014
- Abate by
- Aug 14, 2014
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created point of operation, rotating parts, and flying chips: a) Maintenance Shop, on or about 6/20/14: Leland Gifford Drill Press was not provided with a chuck and tool guard. b) Maintenance Shop, on or about 6/20/14: Ellis Band Saw was not protected with a guard on the unused portion of the blade on the right side.
Recent events (2)
- · I (S) $1470
- · Z (S) $2100
1910.213 H01
- Issued
- Jul 22, 2014
- Abate by
- Aug 14, 2014
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the matetrial being cut: a) Maintenance Shop, on or about 6/20/14: Sears Craftsman Radial Saw had no lower blade guard on either side of blade.
Recent events (2)
- · I (S) $1470
- · Z (S) $2100
1910.213 H04
- Issued
- Jul 22, 2014
- Abate by
- Aug 14, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(h)(4): Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator: a) Maintenance Shop, on or about 6/20/14: Sears Craftsman Radial Arm Saw did not return to the starting position when released.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections at Binghamton Precast & Supply Corp.
View Binghamton Precast & Supply Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 327332)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339819617.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.