Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,193,745Inspections Most recent open 2026-08-06 Last loaded 2026-08-10

OSHA Inspection: SOUTHERN PERFECTION FABRICATION HOLDINGS, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of SOUTHERN PERFECTION FABRICATION HOLDINGS, INC. in 232 GEORGIA HIGHWAY 49 SOUTH, BYRON, GA 31008 (NAICS 331110). OSHA activity number 339958431.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Southern Perfection Fabrication Holdings, INC. for free Get an email when a new federal OSHA severe-injury report for Southern Perfection Fabrication Holdings, INC. is published. One employer, no account, unsubscribe in one click.
Site address
232 GEORGIA HIGHWAY 49 SOUTH
City
BYRON
State
GA
ZIP
31008
Mailing
232 GEORGIA HIGHWAY 49 SOUTH, BYRON, GA 31008
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331110
Employees
65
Ownership type
A

4 citations on file for this inspection.

1910.157 E03

Repeat Gravity 1 2 instances 5 exposed
Issued
Dec 5, 2014
Abate by
Jan 26, 2015
Penalty
Initial $4,620 · Current $2,810 Reduced
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check:  On or about September 18, 2014:  a)  Employees in the maintenance area were exposed to fire hazards as the employer failed to ensure that an annual maintenance check was performed on all fire extinguishers.  b)  Employees in the propane tank storage area were exposed to fire hazards as the employer failed to ensure that an annual maintenance check was performed on all fire extinguishers.  The Southern Perfection Fabrication Holdings, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29  CFR 1910.157(e)(3), which was contained in OSHA inspection number 315739748, citation number 1, item number 9c and was affirmed as a final order on 05/16/2012, with respect to a workplace located at 232 Hwy 49 South, Byron, GA 31008.
Recent events (2)
  • · I (R) $2810
  • · Z (R) $4620

1910.252 B02 III

Repeat Gravity 5 1 instance 10 exposed
Issued
Dec 5, 2014
Abate by
Jan 26, 2015
Penalty
Initial $7,700 · Current $3,334 Reduced
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not required to wear appropriate goggles, to protect them from the rays when noncombustible or flameproof screens or shields were not used:  On or about September 18, 2014:  Employees performing welding in the welding shop were exposed to eye burns due to the lack of screens and/or appropriate goggles.   The Southern Perfection Fabrication Holdings, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29  CFR 1910.252(b)(2)(iii), which was contained in OSHA inspection number 315739748, citation number 1, item number 12 and was affirmed as a final order on 05/16/2012, with respect to a workplace located at 232 Hwy 49 South, Byron, GA 31008.
Recent events (2)
  • · I (R) $3334
  • · Z (R) $7700

1910.253 B02 IV

Other-than-serious 1 instance 10 exposed
Issued
Dec 5, 2014
Abate by
Jan 26, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.253(b)(2)(iv): Valve protection caps, where cylinders were designed to accept caps, were not always in place, hand-tight, except when cylinders were in use or connected for use:(a)(LOCATION)(IDENTIFY SPECIFIC OPERATIONS AND/OR CONDITIONS)(PROVIDE MEASUREMENTS OF DISTANCE WHEN INVOLVED)  On or about September 18, 2014:  A full Argon/Oxygen cylinder stored for use during welding operations was uncapped.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.1200 F06 I

Other-than-serious 1 instance 10 exposed
Issued
Dec 5, 2014
Abate by
Jan 26, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(6)(i): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the information required by 29 CFR 1910.1200(f)(1)(i) through 29 CFR 1910.1200(f)(1)(v)  On or about September 18, 2014:  Employees used chemicals such as but not limited to Blue Magic while performing welding operations.  The bottles of Blue Magic were not labeled as required.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

View Southern Perfection Fabrication Holdings, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339958431.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.