DES PLAINES, IL —
OSHA Inspection: C. I. C. CORPORATION
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of C. I. C. CORPORATION in 1310 ASHLAND AVE., DES PLAINES, IL 60016 (NAICS 238160). OSHA activity number 340026186.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C. I. C. CORPORATION
- Site address
- 1310 ASHLAND AVE.
- City
- DES PLAINES
- State
- IL
- ZIP
- 60016
- Mailing
- 441 WEST BONNER ROAD, WAUCONDA, IL 60084
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 15
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.20 B02
- Issued
- Apr 8, 2015
- Abate by
- May 11, 2015
- Penalty
- Initial $3,500 · Current $2,450 Reduced
C326
General-duty citation text
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s). a) On or about October 21, 2014, C.I.C. Corporation did not maintain a program which provided for regular inspections of the materials and equipment which contained isocyanates to be made by a competent person(s). In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $2450
- — Z (S) $3500
1926.95 A
- Issued
- Apr 8, 2015
- Abate by
- May 11, 2015
- Penalty
- Initial $3,500 · Current $2,450 Reduced
C326
General-duty citation text
29 CFR 1926.95(a): Personal protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, was not provided, used, or maintained in a sanitary and reliable condition it was necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation, or physical contact. a) On or about October 21, 2014, C.I.C. Corporation did not ensure that employees using Millenium PG-1 parts 1 and 2 wore appropriate chemical resistant gloves when chemical hazards were encountered in a manner capable of causing injury or impairment through skin absorption. Millenium PG-1 Part 1 contains diisocyanates, which are a skin sensitizer. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $2450
- — Z (S) $3500
1926.102 A01
- Issued
- Apr 8, 2015
- Abate by
- May 11, 2015
- Penalty
- Initial $3,500 · Current $0 Reduced
C326
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. a) On or about October 21, 2014, C.I.C. Corporation did not ensure that employee(s) wore eye protection when using Millenium PG-1 parts 1 and 2. Millenium PG-1 part 1 contains diisocyanates, which are a skin sensitizer. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $3500
1910.1200 H03 II
- Issued
- Apr 8, 2015
- Abate by
- May 11, 2015
- Penalty
- Initial $3,500 · Current $2,450 Reduced
C326
General-duty citation text
29 CFR 1926.59: The requirements applicable to construction work under this section are identical to those set forth at 29 CFR 1910.1200 of this chapter. 29 CFR 1910.1200(h)(3)(ii): Employee training did not include the physical and health hazards of the chemicals in the work area: a) On or about October 22, 2014, C.I.C. Corporation did not train employees on the physical and health hazards of the chemicals in the work area. Employees were exposed to isocyanates when using Millennium PG-1 part 1. Millennium PG-1 part 1 contains diisocyanates which are skin and respiratory sensitizers. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $2450
- — Z (S) $3500
1910.1200 H03 IV
- Issued
- Apr 8, 2015
- Abate by
- May 11, 2015
- Penalty
- Initial $0 · Current $0
C326
General-duty citation text
29 CFR 1926.59: The requirements applicable to construction work under this section are identical to those set forth at 29 CFR 1910.1200 of this chapter. 29 CFR 1910.1200(h)(3)(iv): Employee training did not include the details of the hazard communication program developed by the employer, including an explanation of the labeling system and the material safety data sheet, and how employees can obtain and use the appropriate hazard information: a) C.I.C. Corporation did not train employees by December 1, 2013 on the revised Safety Data Sheet format and content, as well as the new labeling elements as required by the revised hazard communication standard 29 CFR 1910.1200. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at C. I. C. Corporation
View C. I. C. Corporation's full OSHA safety record →
More inspections in this industry (NAICS 238160)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340026186.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.