DALTON, GA —
OSHA Inspection: GARLAND SALES, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GARLAND SALES, INC. in 1800 ANTIOCH ROAD, DALTON, GA 30720 (NAICS 314110). OSHA activity number 340262393.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GARLAND SALES, INC.
- Site address
- 1800 ANTIOCH ROAD
- City
- DALTON
- State
- GA
- ZIP
- 30720
- Mailing
- P.O. BOX 1870, DALTON, GA 30722
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 314110
- Employees
- 315
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C07 I
- Issued
- Apr 9, 2015
- Abate by
- May 15, 2015
- Penalty
- Initial $5,500 · Current $3,300 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: a) At the facility: The employer did not provide Lockout/Tagout training to authorized and affected employees to ensure that the purpose and function of the energy control program was understood.
Recent events (2)
- — I (S) $3300
- — Z (S) $5500
1910.219 C04 I
- Issued
- Apr 9, 2015
- Abate by
- Apr 28, 2015
- Penalty
- Initial $4,400 · Current $2,640 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: a) At the carpet cutting area- The employer did not ensure that the projecting shaft ends on the cradle/roll up #1 were guarded. b) At the carpet cutting area- The employer did not ensure that the projecting shaft ends on the conveyor were guarded.
Recent events (2)
- — I (S) $2640
- — Z (S) $4400
1910.219 F03
- Issued
- Apr 9, 2015
- Abate by
- Apr 28, 2015
- Penalty
- Initial $8,800 · Current $6,160 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: a) Cutting department, shearing machines: The employer failed to guard sprockets and chains that were less than seven feet above the floor on the shearing/cutter machines with a stationary enclosure, exposing employees to caught-in hazards associated with rotating parts. Garland Sales, Inc., was previously cited for serious violations of this Occupational Safety and Health standard or its equivalent standard, 29 CFR 1910.219 (f) (3) which was contained in OSHA Inspection Number 743804, Citation #1, Item #9, issued on 05/03/2013 with respect to a work place located at 1800 Antioch Road, Dalton, GA 30720 and became a final order on 01/10/2014.
Recent events (2)
- — I (R) $6160
- — Z (R) $8800
1910.262 O
- Issued
- Apr 9, 2015
- Abate by
- May 15, 2015
- Penalty
- Initial $15,400 · Current $10,780 Reduced
General-duty citation text
29 CFR 1910.262(o): All revolving blades on shearing machines were not guarded so that the opening between the cloth surface and the bottom of the guard would not exceed three-eighths inch: a) Cutting department, shearing machines: The employer exposed employees to amputation hazards associated with unguarded blades on the shearing machines that were being used to cut textile materials in varying lengths. Garland Sales, Inc., was previously cited for serious violations of this Occupational Safety and Health standard or its equivalent standard, 29 CFR 1926.262(o) which was contained in OSHA Inspection Number 743804, Citation #1, Item #11, issued on 05/03/2013 with respect to a work place located at 1800 Antioch Road, Dalton, GA 30720 and became a final order on 01/10/2014.
Recent events (2)
- — I (R) $10780
- — Z (R) $15400
More inspections at Garland Sales, INC.
View Garland Sales, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 314110)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340262393.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.