YORK, PA —
OSHA Inspection: MAPLE DONUTS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MAPLE DONUTS, INC. in 3455 EAST MARKET STREET, YORK, PA 17402 (NAICS 311812). OSHA activity number 340283670.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MAPLE DONUTS, INC.
- Site address
- 3455 EAST MARKET STREET
- City
- YORK
- State
- PA
- ZIP
- 17402
- Mailing
- 3455 EAST MARKET STREET, YORK, PA 17402
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311812
- Employees
- 240
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.213 C01
- Issued
- Mar 10, 2015
- Abate by
- Apr 3, 2015
- Penalty
- Initial $7,000 · Current $5,250 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: (a) MAINTENANCE SHOP - Employees used a Chicago Electric 10 inch table saw, and the saw blade was not guarded from contact, thereby exposing employees to amputation hazards, on or about February 4, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $5250
- — Z (S) $7000
1910.213 C02
- Issued
- Mar 10, 2015
- Abate by
- Apr 3, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not equipped with a spreader to prevent material from squeezing the saw or being thrown back on the operator: (a) MAINTENANCE SHOP - Employees used a Chicago Electric 10 inch table saw, and the saw blade was not equipped with a spreader to prevent the wood from pinching the blade, thereby exposing employees to amputation hazards, on or about February 4, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Mar 10, 2015
- Abate by
- Apr 3, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: (a) MAINTENANCE SHOP - Employees used a Chicago Electric 10 inch table saw, and the saw was not equipped with non-kickback fingers to prevent the wood from being forced back toward the operator, thereby exposing employees to amputation hazards, on or about February 4, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 A04
- Issued
- Mar 10, 2015
- Abate by
- Apr 3, 2015
- Penalty
- Initial $3,400 · Current $2,550 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) MAINTENANCE SHOP - Employees used a bench grinder (no identification), and the work rest installed on the grinder was adjusted to a distance of approximately 3/4 inch, thereby exposing employees to serious injuries, on or about February 4, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $2550
- — Z (S) $3400
1910.215 B09
- Issued
- Mar 10, 2015
- Abate by
- Apr 3, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) MAINTENANCE SHOP - Employees used a bench grinder (no identification), and there was no tongue guard installed on the grinder, thereby exposing employees to serious injuries, on or about February 4, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Maple Donuts, INC.
View Maple Donuts, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 311812)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340283670.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.