Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LIVING ROCK CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of LIVING ROCK CONSTRUCTION in KANADA BARRIGADA TOTO, BARRIGADA, GU 96929 (NAICS 236117). OSHA activity number 340344670.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Living Rock Construction — free Get an email when a new federal OSHA severe-injury report for Living Rock Construction is published. One employer, no account, unsubscribe in one click.
Site address
KANADA BARRIGADA TOTO
City
BARRIGADA
State
GU
ZIP
96929
Mailing
PO BOX 4416, HAGATNA, GU 96932
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236117
Employees
18
Ownership type
A

5 citations on file for this inspection.

1926.304 I01

Serious Gravity 5 1 instance 6 exposed
Issued
Apr 13, 2015
Abate by
Apr 23, 2015
Penalty
Initial $1,600 · Current $1,200 Reduced
29 CFR 1926.304(i)(1): Each circular hand-fed rip saw was not guarded by a hood which completely enclosed that portion of the saw blade above the table and that portion of the saw above the material being cut:       a. On February 10, 2015, in the garage area of the construction site, a Ryobi 10" circular table saw used to rip cut plywood did not have a guard covering the blade.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $1600

1926.403 B01 I

Deleted Serious Gravity 1 1 instance 6 exposed
Issued
Apr 13, 2015
Abate by
Apr 21, 2015
Penalty
Initial $1,200 · Current $0 Reduced
29 CFR 1926.403(b)(1)(i): Safety of equipment was not determined on the basis of suitability of the equipment for an identified purpose as evidenced by listing, labeling, or certification for that identified purpose.   a. On February 10, 2015, inside the garage, a metal electrical receptacle box designed to be installed inside of a wall was used on the end of a extension cord.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1200

1926.405 G02 IV

Deleted Serious Gravity 1 1 instance 6 exposed
Issued
Apr 13, 2015
Abate by
Apr 23, 2015
Penalty
Initial $0 · Current $0
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws:   a. On February 10, 2015, inside the garage, employees were using a homemade extension cord connected to a metal receptacle box with the strain relief pulled away from the receptacle box.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 B01

Serious Gravity 1 2 instances 6 exposed
Issued
Apr 13, 2015
Abate by
Apr 23, 2015
Penalty
Initial $1,200 · Current $1,200
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii):   a. On February 10, 2015, on the south side of a construction site, employees were walking/working from scaffolding that was not fully planked.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $1200

1926.405 G02 III

Other-than-serious 1 instance 6 exposed
Issued
Apr 13, 2015
Abate by
Apr 23, 2015
Penalty
Initial $0 · Current $0
29 CFR 1926.405(g)(2)(iii): The repair splice in a hard service flexible cord No. 12 or larger did not retain the insulation, outer sheath properties, and usage characteristics of the cord which was being used:   a. On February 10, 2015, employees were using a #12 extension cord with outer insulation damage and was wrapped in tape, to operate portable power tools and a circular table saw.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Living Rock Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340344670.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.