Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SAENZ ROOFING, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of SAENZ ROOFING, INC. in 139 29 ROAD, GRAND JUNCTION, CO 81503 (NAICS 423330). OSHA activity number 340482157.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Saenz Roofing, INC. — free Get an email when a new federal OSHA severe-injury report for Saenz Roofing, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
SAENZ ROOFING, INC.
Site address
139 29 ROAD
City
GRAND JUNCTION
State
CO
ZIP
81503
Mailing
274 MONTANA ROAD, GRAND JUNCTION, CO 81507
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423330
Employees
3
Ownership type
A

2 citations on file for this inspection.

1926.501 B13

Serious Gravity 10 1 instance 4 exposed
Issued
Aug 20, 2015
Abate by
Sep 15, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.501(b)(13):  Each employee engaged in residential construction activities 6 feet or more above lower levels were not protected by guardrail systems, safety net system, personal fall arrest system, or other approved alternative fall protection system:     (a)   Saenz Roofing, Inc. at 139 29 Road, Grand Junction, CO 81503:  On or before March 9, 2015 the exposing employer did not ensure that employees were protected from injury, in that employees removing and installing shingles on a two-story residential home, with a roof slope of 5-in-12, did not utilize a fall protection system.  On February 28, 2015 an employee sustained serious injuries after falling off the roof on the first level.  This condition exposed employees to fall hazards ranging from 9 to 18 feet.
Recent events (1)
  • — Z (S) $2800

1926.503 A01

Serious Gravity 10 1 instance 4 exposed
Issued
Aug 20, 2015
Abate by
Sep 15, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.503(a)(1):  The employer did not provide a training program for each employee who might be exposed to fall hazards:    (a) Saenz Roofing, Inc. at 139 29 Road, Grand Junction, CO 81503:  On or before March 9, 2015 the exposing employer did not ensure that each employee engaged in roofing operations was trained to recognize the hazards of working at elevation and trained in the use of fall protection.  Employees removing and installing shingles on a two-story residential home, with a roof slope of 5-in-12, did not utilize a fall protection system.  On February 28, 2015 an employee sustained serious injuries after falling off the roof on the first level.  This condition exposed employees to fall hazards ranging from 9 to 18 feet.      Abatement Note:  As of January 1, 1998, Subpart M of the 29 CFR 1926 part 1926.502(d) provides that body belts are not acceptable as part of a personal fall arrest system. The use of a body belt in a tethering system or in a restraint system is acceptable and is regulated under 1926.502(e).    Abatement Note: The employer shall assure that each employee has been trained, as necessary, by a competent person qualified in the following areas:    a) The nature of fall hazards in the work area; b) The correct procedures for erecting, maintaining, disassembling, and inspecting the fall protection systems to be used; c) The use and operation of guardrail systems, personal fall arrest systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used;  d) The role of each employee in the safety monitoring system when this system is used; e) The limitations on the use of mechanical equipment during the performance of roofing work on low-sloped roofs; f) The correct procedures for the handling and storage of equipment and materials and the erection of overhead protection; and g) The role of employees in fall protection plans; h) The standards contained in this subpart.
Recent events (1)
  • — Z (S) $2800

View Saenz Roofing, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340482157.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.