MILAN, MO —
OSHA Inspection: PACKERS SANITATION SERVICES, INC., LTD.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of PACKERS SANITATION SERVICES, INC., LTD. in 22123 HIGHWAY 5,, MILAN, MO 63556 (NAICS 561720). OSHA activity number 340572171.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PACKERS SANITATION SERVICES, INC., LTD.
- Site address
- 22123 HIGHWAY 5,
- City
- MILAN
- State
- MO
- ZIP
- 63556
- Mailing
- 3681 PRISM LANE, KIELER, WI 53812
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561720
- Employees
- 63
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 A02 II
- Issued
- Aug 14, 2015
- Abate by
- Oct 1, 2015
- Penalty
- Initial $4,900 · Current $4,900
General-duty citation text
1910.147(a)(2)(ii): Alternative measures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by the exception of 1910.147(a)(2)(ii) for routine, repetitive, and integral processes such as tool change, change over, and cleaning. (a) On or about April 21, 2015 at worksite 22123 Highway 5, Milan Missouri.- employees were exposed to serious amputation, crushing and struck-by injuries, in that employees had not been trained to demonstrate the knowledge and skills required to safely lock and tag out energy sources for the North and South casing machines when performing sanitation activities. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.
Recent events (2)
- — I (O) $4900
- — Z (S) $4900
1910.147 C04 II B
- Issued
- Aug 14, 2015
- Abate by
- Oct 1, 2015
- Penalty
- Initial $4,900 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedure did not clearly and specifically specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: (a) On or about April 21, 2015 at worksite 22123 Highway 5, Milan Missouri.-Throughout facility: There were no machine specific lockout tagout procedures for machines, such as, but not limited to, the North and South casing machines in the casing area. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.
Recent events (2)
- — I (S) $0
- — Z (S) $4900
1910.147 C06 II
- Issued
- Aug 14, 2015
- Abate by
- Oct 1, 2015
- Penalty
- Initial $3,500 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The periodic inspection certification of energy control procedures did not contain the required documentation on identification of the machine or equipment, inspection date, employees included, and the person performing the inspection (a) On or about April 21, 2015 at worksite 22123 Highway 5, Milan Missouri. An examination of program elements determined that periodic inspections of energy control procedures were not accomplished and certified. Specifically, reviews were not conducted to determine if listed steps were still adequate, if any changes had occurred, or if employees had acquired the knowledge needed to effectively isolate energy sources. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.
Recent events (2)
- — I (S) $0
- — Z (S) $3500
1910.212 A
- Issued
- Aug 14, 2015
- Abate by
- Oct 1, 2015
- Penalty
- Initial $4,900 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about April 21, 2015 at worksite 22123 Highway 5, Milan Missouri.- Employees in the casing area were exposed to a amputation hazard by high resolution parts and rotating chains inside machinery by removing the guard/cover of the conveyor when performing sanitation duties.
Recent events (2)
- — I (S) $0
- — Z (S) $4900
More inspections at Packers Sanitation Services, INC., LTD.
View Packers Sanitation Services, INC., LTD.'s full OSHA safety record →
More inspections in this industry (NAICS 561720)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340572171.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.