TEMPLE, TX —
OSHA Inspection: MOORECO, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MOORECO, INC. in 2885 LORRAINE AVENUE, TEMPLE, TX 76501 (NAICS 337127). OSHA activity number 340645183.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MOORECO, INC.
- Site address
- 2885 LORRAINE AVENUE
- City
- TEMPLE
- State
- TX
- ZIP
- 76501
- Mailing
- P.O. DRAWER D, TEMPLE, TX 76503
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337127
- Employees
- 170
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C06 I
- Issued
- Nov 12, 2015
- Abate by
- Mar 2, 2016
- Penalty
- Initial $7,000 · Current $5,600 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: The employer did not conduct a periodic inspection of lockout procedures on such machines as, but not limited to, rotary presses, laminating machines and saws, exposing employees the hazards of being struck by machinery and equipment.
Recent events (2)
- — I (S) $5600
- — Z (S) $7000
1910.303 F01
- Issued
- Nov 12, 2015
- Abate by
- Nov 18, 2015
- Penalty
- Initial $4,400 · Current $3,520 Reduced
General-duty citation text
29 CFR 1910.303(f)(1): Each disconnecting means required by Subpart S of Part 1910 for motors and appliances was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: On or about May 18, 2015, and in times prior thereto, the disconnect for the #1 glue line roller had a label on it that was out of date incorrect, exposing employees to the hazards of electrical shock.
Recent events (2)
- — I (S) $3520
- — Z (S) $4400
1910.1200 F05 I
- Issued
- Nov 12, 2015
- Abate by
- Nov 18, 2015
- Penalty
- Initial $3,300 · Current $2,640 Reduced
1560
General-duty citation text
29 CFR 1910.1200(f)(5)(i): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical contained therein. In the alternative: 29 CFR 1910.1200(f)(6)(i): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the information required by 29 CFR 1910.1200(f)(1)(i) through 29 CFR 1910.1200(f)(1)(v): a) On or about May 18, 2015 and in times prior thereto, in the #1 Glue line area, a plastic container of flammable WD-40 was not labeled. The WD-40 was used on the rollers of a WALCO roller coater, exposing employees to the hazards of chemical contact and fire. b) On or about September 3, 2015 and in times prior thereto, in the Trim Saw Department, a plastic sports drink bottle containing a chemical believed to be flammable isopropyl alcohol was used by employees to clean oil and grease from trim and was labeled only "Warning Acetone" and "do not drink", exposing employees to the hazards of chemical contact and fire.
Recent events (2)
- — I (S) $2640
- — Z (S) $3300
1910.1200 F05 II
- Issued
- Nov 12, 2015
- Abate by
- Nov 18, 2015
- Penalty
- Initial $0 · Current $0
1560
General-duty citation text
29 CFR 1910.1200(f)(5)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the appropriate hazard warning: In the Alternative 29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical: a) On or about May 18, 2015, and in times prior thereto, in the #1 Glue line area, a plastic container of flammable WD-40 was not labeled with appropriate hazard warnings. The WD-40 was used on the rollers of a WALCO roller coater, exposing employees to the hazards of chemical contact and fire. b) On or about September 3, 2015, and in times prior thereto, in the Trim Saw Department, a plastic sports drink bottle containing a chemical believed to be flammable isopropyl alcohol was used by employees to clean oil and grease from trim and was labeled only "Warning Acetone" and "do not drink", exposing employees to the hazards of chemical contact and fire.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C04 I
- Issued
- Nov 12, 2015
- Abate by
- Nov 18, 2015
- Penalty
- Initial $38,500 · Current $30,800 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about May 14, 2015 and in times prior thereto and thereafter, in the #1 Glue Line area, a WALCO roller coater did not have a specific procedure for locking it out. Employees cleaned and wrapped rollers with plastic, and set up the machine for operation without de-energizing the machine and locking it out, exposing employees to the hazards of being caught in the rollers. The MooreCo, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.147(c)(4)(i), which was contained in OSHA inspection number 965451, citation number 1, item number 2 and was affirmed as a final order on August 11, 2014, with respect to a workplace located at 2885 Lorraine Ave, Temple, TX 76501.
Recent events (2)
- — I (R) $30800
- — Z (R) $38500
1910.212 A01
- Issued
- Nov 12, 2015
- Abate by
- Nov 18, 2015
- Penalty
- Initial $38,500 · Current $30,800 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: On or about May 14, 2015 and in times prior thereto and thereafter, in the #1 Glue Line area, the rollers of a WALCO roller coater were not guarded, exposing employees to the hazards of being caught in the rollers during production operations. The MooreCo, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.212(a)(1), which was contained in OSHA inspection number 965451, citation number 1, item number 3 and was affirmed as a final order on August 11, 2014, with respect to a workplace located at 2885 Lorraine Ave, Temple, TX 76501.
Recent events (2)
- — I (R) $30800
- — Z (R) $38500
More inspections at Mooreco, INC.
View Mooreco, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337127)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340645183.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.