Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MOORECO, INC.

Follow-up inspection · Safety discipline

On , OSHA opened a follow-up safety inspection of MOORECO, INC. in 2885 LORRAINE AVENUE, TEMPLE, TX 76501 (NAICS 337127). OSHA activity number 345265276.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Mooreco, INC. — free Get an email when a new federal OSHA severe-injury report for Mooreco, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
MOORECO, INC.
Site address
2885 LORRAINE AVENUE
City
TEMPLE
State
TX
ZIP
76501
Mailing
2885 LORRAINE AVENUE, TEMPLE, TX 76501
Inspection type
Follow-up (F)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
337127
Employees
258
Ownership type
A

4 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 10 1 instance 2 exposed
Issued
Oct 20, 2021
Abate by
Nov 10, 2021
Penalty
Initial $13,653 · Current $6,827 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  On or about April 21, 2021, and at times prior thereto, and thereafter, in the #1 Glue Line area, LOTO procedures developed for the WALCO Roller Coater were not being followed by employees setting up the machine for operation, exposing employees to the hazard of being caught-in moving parts.
Recent events (2)
  • — I (S) $6826.5
  • — Z (S) $13653

1910.147 C06 I

Repeat Gravity 10 1 instance 10 exposed
Issued
Oct 20, 2021
Abate by
Nov 10, 2021
Penalty
Initial $75,092 · Current $37,546 Reduced
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  On or about April 20, 2021, and at times prior thereto, the employer did not conduct a periodic inspection of the energy control procedures on machines such as, but not limited to Glue Line #1 WALCO Roller Coater machine, exposing employees to the hazard of being caught-in moving parts.   The MooreCo, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.147(c)(6)(i), which was contained in OSHA inspection number 1289686, citation number 2, item 1 and was affirmed as a final order on June 11, 2018, with respect to a workplace located at 2885 Lorraine Ave, Temple, TX 76501.
Recent events (2)
  • — I (R) $37546
  • — Z (R) $75092

1910.147 C07 I A

Repeat Gravity 10 1 instance 9 exposed
Issued
Oct 20, 2021
Abate by
Nov 10, 2021
Penalty
Initial $75,092 · Current $37,546 Reduced
29 CFR 1910.147(c)(7)(i)(A): Each authorized employee did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control:  On or about April 21, 2021, and at times prior thereto, employees were conducting servicing by threading surface material through a WALCO Roller Coater machine without first being trained on the lockout/tagout program, exposing the employees to the hazard of being caught-in moving parts.  The MooreCo, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.147(c)(7)(i)(A), which was contained in OSHA inspection number 1289686, citation number 1, item 3b and was affirmed as a final order on June 11, 2018, with respect to a workplace located at 2885 Lorraine Ave, Temple, TX 76501.
Recent events (2)
  • — I (R) $37546
  • — Z (R) $75092

1910.147 D04 I

Repeat Gravity 10 1 instance 2 exposed
Issued
Oct 20, 2021
Abate by
Nov 10, 2021
Penalty
Initial $75,092 · Current $37,546 Reduced
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees.  On or about April 21, 2021, and at times prior thereto, employees were conducting servicing work by threading surface material through a WALCO Roller Coater machine without applying a lock to isolate the energy source, exposing the employees to the hazard of being caught-in moving parts.  The MooreCo, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.147(d)(4)(i), which was contained in OSHA inspection number 1289686, citation number 1, item 2 and was affirmed as a final order on June 11, 2018, with respect to a workplace located at 2885 Lorraine Ave, Temple, TX 76501.
Recent events (2)
  • — I (R) $37546
  • — Z (R) $75092

View Mooreco, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345265276.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.