CANTON, OH —
OSHA Inspection: JOHN MICHAEL MILLER CONSTRUCTION INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JOHN MICHAEL MILLER CONSTRUCTION INC in 6476 STRIP AVE NW, CANTON, OH 44720 (NAICS 238130). OSHA activity number 340730217.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JOHN MICHAEL MILLER CONSTRUCTION INC
- Site address
- 6476 STRIP AVE NW
- City
- CANTON
- State
- OH
- ZIP
- 44720
- Mailing
- PO BOX 2559, MCDONOUGH, GA 30253
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 100
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.95 A
- Issued
- Jul 1, 2015
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1926.95(a): Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, were not provided: On or about June, 24, 2015, during carpentry and framing operations at the job site located at 6474 Strip Ave. NW, Canton Ohio 44720; the employer did not ensure employees cutting material with a Remington Versa Saw (electric chainsaw) serial number RM1635W were protected from injury by utilizing personal protective equipment (leg coverings).
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1926.102 A01
- Issued
- Jul 1, 2015
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. On or about June, 24, 2015, during carpentry and framing operations at the job site located at 6474 Strip Ave. NW, Canton Ohio 44720; the employer did not ensure employees cutting material with a circular saw were protected from eye injury by using personal protective equipment.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1926.451 A01
- Issued
- Jul 1, 2015
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1926.451(a)(1): Each scaffold and/or scaffold component was not capable of supporting, without failure, its own weight and at least 4 times the maximum intended load applied or transmitted to it: On or about June 24, 2014, at a job site located at 6476 Strip Ave. NW, Canton, OH, during carpentry and framing activities, the employer exceeded the load imposed on a mobile scaffold (scissors lift) guardrail by an employee standing on a guardrail to perform work activities
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1926.453 B02 V
- Issued
- Jul 1, 2015
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1926.453(b)(2)(v): A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift: On or about June 24, 2014, at a job site located at 6476 Strip Ave. NW, Canton, OH; during carpentry and framing activities the employer did not ensure all employees using an aerial lift were protected from fall hazards of approximately 14 feet by a fall protection device.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1926.454 A
- Issued
- Jul 1, 2015
- Penalty
- Initial $4,900 · Current $2,450 Reduced
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a.) On or about June, 24, 2015, during carpentry and framing operations at the job site located at 6474 Strip Ave. NW, Canton Ohio 44720; the employer did not ensure employees working on a mobile scaffold were trained by a qualified person to recognize hazards related to their working platform. b.) On or about June, 24, 2015, during carpentry and framing operations at the job site located at 6474 Strip Ave. NW, Canton Ohio 44720; the employer did not ensure employees working on an Aerial lift were trained by a qualified person to recognize hazards related to their working platform.
Recent events (2)
- — I (S) $2450
- — Z (S) $4900
More inspections at John Michael Miller Construction INC
View John Michael Miller Construction INC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340730217.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.