Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LASSITER LUMBER, LLC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of LASSITER LUMBER, LLC. in 1472 HWY 17, SILAS, AL 36919 (NAICS 321113). OSHA activity number 340738681.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Lassiter Lumber, LLC. — free Get an email when a new federal OSHA severe-injury report for Lassiter Lumber, LLC. is published. One employer, no account, unsubscribe in one click.
Site address
1472 HWY 17
City
SILAS
State
AL
ZIP
36919
Mailing
1472 HWY 17, SILAS, AL 36919
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321113
Employees
40
Ownership type
A

5 citations on file for this inspection.

1910.219 D01

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 16, 2015
Penalty
Initial $1,785 · Current $1,015 Reduced
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):    a)  Filing Room; On or about June 24, 2015 and at times prior thereto the employer exposed employees to amputation hazards in that employees were allowed to walk and work around an Armstrong Saw Blade filing machine which had unguarded pulleys.
Recent events (2)
  • — I (S) $1015.3
  • — Z (S) $1785

1910.219 E01 I

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 16, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt:   a)  Filing Room; On or about June 24, 2015 and at times prior thereto the employer exposed employees to amputation hazards in that employees were allowed to walk and work around an Armstrong Saw Blade filing machine which had unguarded belts.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.253 B04 III

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 16, 2015
Penalty
Initial $1,785 · Current $1,015 Reduced
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one half hour:        a)  Compressed Gas Storage Area; On or about June 24, 2015 and at times prior thereto the employer exposed employees to fire hazards in that employees were allowed to walk and work in the same area where oxygen cylinders and fuel gas (acetylene) cylinders were stored together without a barrier as required by the standard.
Recent events (2)
  • — I (S) $1015.3
  • — Z (S) $1785

1910.265 C05 II

Serious Gravity 1 1 instance 1 exposed
Issued
Jul 16, 2015
Penalty
Initial $1,339 · Current $1,015 Reduced
29 CFR 1910.265(c)(5)(ii): Stairways were not provided with a standard handrail on at least one side or on any open side:       a)  Saw Mill; On or about June 24, 2015 and at times prior thereto the employer exposed employees to fall hazards of 8 feet while walking up and down a set of stairs at the green stacker which did not have a standard handrail on the open side.
Recent events (2)
  • — I (S) $1015.3
  • — Z (S) $1339

1910.305 B01 II

Serious Gravity 1 2 instances 1 exposed
Issued
Jul 16, 2015
Penalty
Initial $1,339 · Current $1,015 Reduced
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:     a)  Saw Mill Main; On or about June 24, 2015 and at times prior thereto the employer exposed employees to electrical and fire hazards in that employees were allowed to walk and work around electrical disconnects with open holes not effectively closed.    a)  Filing Room; On or about June 24, 2015 and at times prior thereto the employer exposed employees to electrical and fire hazards in that employees were allowed  to walk and work around electrical disconnects with open holes not effectively closed.
Recent events (2)
  • — I (S) $1015.3
  • — Z (S) $1339

View Lassiter Lumber, LLC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340738681.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.