FAIRFIELD, NJ —
OSHA Inspection: UNIFOIL CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of UNIFOIL CORPORATION in 12 DANIEL ROAD, EAST, FAIRFIELD, NJ 07004 (NAICS 322222). OSHA activity number 340792258.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UNIFOIL CORPORATION
- Site address
- 12 DANIEL ROAD, EAST
- City
- FAIRFIELD
- State
- NJ
- ZIP
- 07004
- Mailing
- 12 DANIEL ROAD, EAST, FAIRFIELD, NJ 07004
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322222
- Employees
- 62
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.101 B
- Issued
- Sep 28, 2015
- Penalty
- Initial $3,080 · Current $2,365 Reduced
General-duty citation text
29 CFR 1910.101(b): The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks were not in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in 29 CFR 1910.6: a) Outside maintenance shop Employee(s) were exposed to physical injury from unsecured nitrogen and oxygen compressed gas cylinders. Condition observed on or about 7/22/2015.
Recent events (2)
- — I (S) $2365
- — Z (S) $3080
1910.147 C06 I C
- Issued
- Sep 28, 2015
- Abate by
- Dec 18, 2015
- Penalty
- Initial $3,850 · Current $2,365 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i)(C): Where lockout was used for energy control, the periodic inspection did not include a review, between the inspector and each authorized employee, of that employee's responsibilities under the energy control procedure being inspected: a) 12 Daniel Rd., Fairfield, NJ The periodic inspection did not include a review between the inspector and each authorized employee required to perform lockout/tagout procedures during maintenance and/or repair of equipment, including but not limited to laminators, slitters, sheeters and compactor. During such activities employees are exposed to hazardous residual energy, including but not limited to, electrical, mechanical and hydraulic. Condition observed on or about 8/11/2015.
Recent events (2)
- — I (S) $2365
- — Z (S) $3850
1910.178 A05
- Issued
- Sep 28, 2015
- Abate by
- Nov 16, 2015
- Penalty
- Initial $3,850 · Current $2,365 Reduced
General-duty citation text
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: a) Warehouse Hyster Model S120FT, powered industrial truck, which utilizes a paper roll clamp attachment, was not marked to identify the attachment and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered. Condition observed on or about 8/11/2015.
Recent events (2)
- — I (S) $2365
- — Z (S) $3850
1910.212 A03 II
- Issued
- Sep 28, 2015
- Penalty
- Initial $5,390 · Current $2,365 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Storage area A constant pressure switch and/or interlock was not provided for the Brand-Marathon, Model #225 VI compactor, to prevent employees from accessing the danger zone during the operating cycle. Condition observed on or about 8/11/2015.
Recent events (2)
- — I (S) $2365
- — Z (S) $5390
1910.305 B02 I
- Issued
- Sep 28, 2015
- Penalty
- Initial $3,080 · Current $2,365 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: a) Finishing area Junction box used for mixer plug did not have cover, exposing employees to electric shock from contact with live parts. Condition observed on or about 7/22/2015.
Recent events (2)
- — I (S) $2365
- — Z (S) $3080
1910.147 C05 II D
- Issued
- Sep 28, 2015
- Abate by
- Dec 18, 2015
- Penalty
- Initial $7,700 · Current $2,365 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(ii)(D): Lockout devices and tagout devices did not indicate the identity of the employee applying the device(s): a) Finishing area Lockout devices used during maintenance of Lawson Guillotine cutter did not identify the employee applying the device. Condition observed on or about 7/22/2015. Unifoil Corp. was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 1910.147(c)(5)(ii)(D), which was contained in OSHA inspection number 900366, citation number 1, item number 2 and was affirmed as a final order on 9/6/2013, with respect to a workplace located at 12 Daniel Road East, Fairfield, NJ .
Recent events (2)
- — I (R) $2365
- — Z (R) $7700
1910.1200 F06 II
- Issued
- Sep 28, 2015
- Abate by
- Nov 16, 2015
- Penalty
- Initial $6,160 · Current $2,365 Reduced
General-duty citation text
29 CFR 1910.1200(f)(6)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical: a) Laminating area The employer did not label portable secondary containers of Westech CT-1050 Cellmagic and A215 Adhesive with the product identifier and/or appropriate hazards warning. b) Outside lab The employer did not label a secondary container of methyl ethyl ketone (MEK) with a product identifier and appropriate hazard warning. Conditions observed on or about 7/22/2015 and 8/11/2015. Unifoil Corporation was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.1200(f)(5), which was contained in OSHA inspection number 900366, citation number 1, item number 7 and was affirmed as a final order on 9/6/2013, with respect to a workplace located at 12 Daniel Road, Fairfield, NJ.
Recent events (2)
- — I (R) $2365
- — Z (R) $6160
1910.141 D02 III
- Issued
- Sep 28, 2015
- Abate by
- Oct 8, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.141(d)(2)(iii): Lavatories were not provided with hand soap or similar cleansing agent: a) Men's bathroom Dispensers for hand soap and hand sanitizer in the men's bathroom were empty. Employees could not disinfect hands after using the bathroom and/or before eating lunch or break. Condition observed on or about 9/17/2015.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Unifoil Corporation
View Unifoil Corporation's full OSHA safety record →
More inspections in this industry (NAICS 322222)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340792258.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.