ELBA, AL —
OSHA Inspection: INZI CONTROLS ALABAMA, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of INZI CONTROLS ALABAMA, INC. in 375 HWY 203, ELBA, AL 36323 (NAICS 336399). OSHA activity number 340961812.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INZI CONTROLS ALABAMA, INC.
- Site address
- 375 HWY 203
- City
- ELBA
- State
- AL
- ZIP
- 36323
- Mailing
- 375 HWY 203, ELBA, AL 36323
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336399
- Employees
- 260
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 29, 2015
- Abate by
- Jan 19, 2016
- Penalty
- Initial $7,000 · Current $5,000 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: (a) On the production floor and areas outside of the facility: On October 6, 2015 and at times prior to; the employer exposed his employees to crushing hazards from the forklift Rollover Protection System (ROPS) in that the employer did not enforce the seatbelt requirement.
Recent events (2)
- — I (S) $5000
- — Z (S) $7000
1910.22 A01
- Issued
- Dec 29, 2015
- Abate by
- Jan 26, 2016
- Penalty
- Initial $3,400 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition: (a) Walkway between press 102 and 104 On October 6, 2015 and at times prior to; the employer exposed employees working on press 102 to trip hazards from a 230 VAC cord and a pneumatic line that operate the resin feeder.
Recent events (2)
- — I (S) $2000
- — Z (S) $3400
1910.22 A02
- Issued
- Dec 29, 2015
- Abate by
- Jan 19, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(2): Floor(s) of workroom(s) were not maintained in a clean and, so far as possible, a dry condition: (a) Around presses 104, 106 108: On October 6, 2015 and at times prior to; the employer exposed his employees to slip hazards from leaking hydraulic fluid and water that covered the work area floor. (b) Around presses 308 & 210: On October 6, 2015 and at times prior to; the employer exposed his employees to slip hazards from leaking water that covered the work area floor.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L01 I
- Issued
- Dec 29, 2015
- Abate by
- Feb 5, 2016
- Penalty
- Initial $7,000 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) Facility Wide: On October 6, 2015 and at times prior to; the employer exposed employees working on the production floor to struck-by hazards in that at least 5 forklift operators have not completed training as required by this regulation.
Recent events (2)
- — I (S) $5000
- — Z (S) $7000
1910.178 L04 II B
- Issued
- Dec 29, 2015
- Abate by
- Feb 5, 2016
- Penalty
- Initial $7,000 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(ii)(B): Refresher training, including an evaluation of the effectiveness of that training, was not provided to the operator when the operator has been involved in an accident or near-miss incident: (a) Electrical power panel near injection molding machine 103: On September 27, 2015, the employer exposed employees who work in the plant to struck-by hazards in that a forklift operator struck and damaged an electrical panel and did not receive any form of training or performance evaluation.
Recent events (2)
- — I (S) $5000
- — Z (S) $7000
1910.178 L04 III
- Issued
- Dec 29, 2015
- Abate by
- Feb 5, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: (a) Facility Wide: On October 6, 2015 and at times prior to; the employer exposed his employees to struck-by hazards from forklifts in that forklift operator's performance is not evaluated at least once every three years.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Inzi Controls Alabama, INC.
View Inzi Controls Alabama, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336399)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340961812.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.