BECHTELSVILLE, PA —
OSHA Inspection: SCICAST INTERNATIONAL, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SCICAST INTERNATIONAL, INC. in 650 ROUTE 100 NORTH, BECHTELSVILLE, PA 19505 (NAICS 331521). OSHA activity number 340984871.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Scicast International, INC. — free
Get an email when a new federal OSHA severe-injury report for Scicast International, INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- SCICAST INTERNATIONAL, INC.
- Site address
- 650 ROUTE 100 NORTH
- City
- BECHTELSVILLE
- State
- PA
- ZIP
- 19505
- Mailing
- 650 ROUTE 100 NORTH, BECHTELSVILLE, PA 19505
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331521
- Employees
- 47
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.147 C04 I
- Issued
- Apr 13, 2016
- Abate by
- Nov 30, 2017
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) 650 Route 100 North, Bechtelsville Pennsylvania - Employees work on equipment having multiple energy sources, such as electric, hydraulic and air. The employer did not develop, document and utilize specific energy control procedures, on or about October 14, 2015. (b) CNC Mills - Procedures were not developed, documented and utilized for the control of potentially hazardous energy on Kitamura Mycenter Mills exposing employees to hazards when engaging in repair and maintenance activities, on or about October 14, 2015. (c) CNC Mills - Procedures were not developed, documented and utilized for the control of potentially hazardous energy on a Haas VF-2 Mill exposing employees to hazards when engaging in repair and maintenance activities, on or about October 14, 2015. (d) Die Shop CNC Mills - Procedures were not developed, documented and utilized for the control of potentially hazardous energy on a Hass Mill exposing employees to hazards when engaging in repair and maintenance activities, on or about October 14, 2015. (e) Die Shop CNC Mills - Procedures were not developed, documented and utilized for the control of potentially hazardous energy on a Sodick EDM Mill exposing employees to hazards when engaging in repair and maintenance activities, on or about October 14, 2015. (f) CNC Lathes - Procedures were not developed, documented and utilized for the control of potentially hazardous energy on Haas SL-20 mills exposing employees to hazards when engaging in repair and maintenance activities, on or about October 14, 2015. (g) CNC Lathes - Procedures were not developed, documented and utilized for the control of potentially hazardous energy on a Haas SL-10 mill exposing employees to hazards when engaging in repair and maintenance activities, on or about October 14, 2015. (h) HPM DCMS - Procedures were not developed, documented and utilized for the control of potentially hazardous energy on 400 ton die casting machine presses exposing employees to hazards when engaging in repair and maintenance activities, on or about October 14, 2015. (i) HPM DCMS - Procedures were not developed, documented and utilized for the control of potentially hazardous energy on 250 ton die casting machine presses exposing employees to hazards when engaging in repair and maintenance activities, on or about October 14, 2015. (j) HPM DCMS - Procedures were not developed, documented and utilized for the control of potentially hazardous energy on a 200 ton die casting machine press exposing employees to hazards when engaging in repair and maintenance activities, on or about October 14, 2015. (k) HPM DCMS - Procedures were not developed, documented and utilized for the control of potentially hazardous energy on a 130 ton die casting machine press exposing employees to hazards when engaging in repair and maintenance activities, on or about October 14, 2015. (l) HPM DCMS - Procedures were not developed, documented and utilized for the control of potentially hazardous energy on a 100 ton die casting machine press exposing employees to hazards when engaging in repair and maintenance activities, on or about October 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $1750
- — C (S) $3500
- — Z (S) $3500
1910.147 C08
- Issued
- Apr 13, 2016
- Abate by
- Nov 30, 2017
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.147(c)(8): Energy isolation. Lockout or tagout shall be performed only by the authorized employees who are performing the servicing or maintenance. (a) 650 Route 100 North, Bechtelsville Pennsylvania, Casting Department - Employees changed a die while the machine was locked by maintenance personnel. The employer did not ensure that the employee performing the service or maintenance performed the logout, on or about October 14, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (3)
- — F (S) $1750
- — C (S) $3500
- — Z (S) $3500
More inspections at Scicast International, INC.
Jun 22, 2016
BECHTELSVILLE, PA
Jun 22, 2016
BECHTELSVILLE, PA
Jun 22, 2016
BECHTELSVILLE, PA
Mar 11, 2015
BECHTELSVILLE, PA
Feb 3, 2015
BECHTELSVILLE, PA
View Scicast International, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 331521)
Apr 29, 2026
Wabash Castings Incorporated · WABASH, IN
Mar 25, 2026
WA317990447 - Travis Pattern & Foundry INC · SPOKANE, WA
Jan 28, 2026
160418 - Aallied DIE Casting Company of North Carolina · RUTHERFORDTON, NC
May 28, 2025
68020 - Gibbs DIE Casting Corporation · HENDERSON, KY
Apr 30, 2025
WA317985803 - Travis Pattern & Foundry INC · SPOKANE, WA
More inspections in PA
Jul 17, 2026
FOX Tapping INC. · COLUMBIA, PA
Jul 17, 2026
Columbia Water CO · COLUMBIA, PA
Jul 17, 2026
NEW Enterprise Stone & Lime CO., INC. · WILKES BARRE, PA
Jul 16, 2026
Mukhleen Gernaros Pizza LLC DBA Genaro'S Pizzeria and Steaks · PHILADELPHIA, PA
Jul 16, 2026
Center City Construction and Development, LLC · PHILADELPHIA, PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340984871.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.