NORTH BERGEN, NJ —
OSHA Inspection: COLONNA BROTHERS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of COLONNA BROTHERS, INC. in 4102 BERGEN TURPIKE, NORTH BERGEN, NJ 07047 (NAICS 311513). OSHA activity number 341029163.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COLONNA BROTHERS, INC.
- Site address
- 4102 BERGEN TURPIKE
- City
- NORTH BERGEN
- State
- NJ
- ZIP
- 07047
- Mailing
- 4102 BERGEN TURNPIKE, NORTH BERGEN, NJ 07047
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311513
- Employees
- 67
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.23 C01
- Issued
- Jan 7, 2016
- Abate by
- Mar 14, 2016
- Penalty
- Initial $4,900 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards: a. 4102 Bergen Turnpike North Bergen, NJ a. Workers engaged in packaging operations on a platform at an approximate height of 6.5 feet or more were exposed to fall hazards as the platform was not guarded by standard railings. Violation observed on or about 10/14/2015 b. Workers engaged in packaging operations in the shipping an receiving area on a platform at an approximate height of 6.5 feet or more were exposed to fall hazards as the platform was not guarded by standard railings. Violation observed on or about 10/14/2015
Recent events (2)
- — I (S) $3000
- — Z (S) $4900
1910.147 C04 I
- Issued
- Jan 7, 2016
- Abate by
- Mar 14, 2016
- Penalty
- Initial $4,900 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. a. 4102 Bergen Turnpike North Bergen, NJ Where amputation hazards exists and employees unjammed equipment, the employer failed to develop energy control procedures that identify the specific steps to follow to isolate and control hazardous energy of the tray maker machine. Violation occurred on or about 10/07/2015
Recent events (2)
- — I (S) $3000
- — Z (S) $4900
1910.212 A01
- Issued
- Jan 7, 2016
- Abate by
- Mar 14, 2016
- Penalty
- Initial $4,900 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. 4102 Bergen Turnpike North Bergen, NJ The guards of the tray maker machine are not secured from opening during the operating cycle of the machine or interlocked to deactivate the machine if a guard would be opened during operation. Violation occurred on or about 10/07/2015
Recent events (2)
- — I (S) $3000
- — Z (S) $4900
1910.219 F03
- Issued
- Jan 7, 2016
- Abate by
- Mar 14, 2016
- Penalty
- Initial $4,900 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets. a. 1615 51st Street North Bergen, NJ The rotating chains and sprocket wheels on the production line tray maker were not guarded, exposing employees to caught-in, crushing, and amputation hazards. Violation observed on or about 10/14/2015
Recent events (2)
- — I (S) $3000
- — Z (S) $4900
1904.29 B03
- Issued
- Jan 7, 2016
- Abate by
- Feb 3, 2016
- Penalty
- Initial $700 · Current $0 Reduced
General-duty citation text
29 CFR 1904.29(b)(3): Each recordable injury or illness was not entered on the OSHA 300 Log and/or an incident report (OSHA Form 301or equivalent) within seven (7) calendar days of receiving information that a recordable injury or illness has occulted: a. 4102 Bergen Turnpike North Bergen, NJ (Workplace) The employer did not include an injury to the OSHA 300 log that took place on October 07, 2015, which resulted in job restrictions. Violation occurred on or about 10/14/2015
Recent events (2)
- — I (O) $0
- — Z (O) $700
1904.29 B01
- Issued
- Jan 7, 2016
- Abate by
- Feb 3, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.29(b)(1): A log of all recordable work-related injuries and illness (OSHA Form 300 or equivalent) was not completed in the detail required by the regulation. a. 4102 Bergen Turnpike North Bergen, NJ All entries in Column F of the OSHA Form 300 for calendar year 2015 did not describe the object/substance that directly injured or made the person ill as required by the regulation and listed in the instructions off the form. Violation occurred on or about 10/14/2015
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Colonna Brothers, INC.
View Colonna Brothers, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 311513)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341029163.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.