COLLEGE POINT, NY —
OSHA Inspection: AFC INDUSTRIES, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of AFC INDUSTRIES, INC. in 13-16 133RD PLACE, COLLEGE POINT, NY 11356 (NAICS 332322). OSHA activity number 341174449.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AFC INDUSTRIES, INC.
- Site address
- 13-16 133RD PLACE
- City
- COLLEGE POINT
- State
- NY
- ZIP
- 11356
- Mailing
- 13-16 133RD PLACE, COLLEGE POINT, NY 11356
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 90
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.37 A03
- Issued
- Apr 8, 2016
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.37(a)(3): Exit routes were not kept free and unobstructed. Materials or equipment were placed, either permanently or temporarily, within the exit route: a) On or about 01/13/16, at the establishment of 13-16 133rd Place. College Point, NY An exit route in the metal shop was obstructed with the office desk and a cabinet. ABATEMENT VERIFICATION IS NOT REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.213 D01
- Issued
- Apr 8, 2016
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) On or about 01/13/16, at the establishment of 13-16 133rd Place. College Point, NY A 10 inches Powermatic circular crosscut table saw was not guarded by a hood as required. ABATEMENT VERIFICATION IS NOT REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.215 A04
- Issued
- Apr 8, 2016
- Abate by
- Apr 14, 2016
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) On or about 01/13/16, at the establishment of 13-16 133rd Place. College Point, NY Work rest on a bench grinder machinery to the wheel was opening of one inch. ABATEMENT VERIFICATION IS NOT REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.215 B09
- Issued
- Apr 8, 2016
- Abate by
- Apr 14, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (Use only for bench, floor, or cylindrical grinders.) a) On or about 01/13/16, at the establishment of 13-16 133rd Place. College Point, NY The distance between an abrasive wheel periphery and adjustable tongue at the top on the pedestal grinder machinery was approximately one inch. ABATEMENT VERIFICATION IS NOT REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at AFC Industries, INC.
View AFC Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341174449.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.