Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: OAK HILL VENEER, INCORPORATED

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of OAK HILL VENEER, INCORPORATED in 23189 S.R. 14 NORTH P.O. BOX 304, TROY, PA 16947 (NAICS 321211). OSHA activity number 341251882.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch OAK Hill Veneer, Incorporated — free Get an email when a new federal OSHA severe-injury report for OAK Hill Veneer, Incorporated is published. One employer, no account, unsubscribe in one click.
Site address
23189 S.R. 14 NORTH P.O. BOX 304
City
TROY
State
PA
ZIP
16947
Mailing
P.O. BOX 304, TROY, PA 16947
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321211
Employees
63
Ownership type
A

4 citations on file for this inspection.

1910.219 C04 I

Serious Gravity 1 1 instance 3 exposed
Issued
Apr 19, 2016
Penalty
Initial $2,100 · Current $1,500 Reduced
29 CFR 1910.219(c)(4)(i): Projecting shaft ends did not present a smooth edge and end and projected more than one-half the diameter of the shaft:    a) Log Prep Area: An unguarded projecting shaft end located directly behind the bandsaw operator's station exposed workers to an entanglement hazard, on or about February 16, 2016.    ABATEMENT OBSERVED DURING INSPECTION  NO CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2100

1910.219 F03

Repeat Gravity 5 1 instance 3 exposed
Issued
Apr 19, 2016
Abate by
Jun 6, 2016
Penalty
Initial $7,000 · Current $7,000
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed:  a) Log Prep Area: A set of sprocket wheels and chains on the band saw conveyor were not enclosed by a guard, exposing employees to an amputation injury created by the unguarded in-running nip point, on or about February 8, 2016.  ABATEMENT CERTIFICATION AND DOCUMENTATION REQUIRED  Oak Hill Veneer, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 29 CFR 1910.219(f)(3), which was contained in OSHA inspection number 314164146, citation number 1, item number 7 and was affirmed as a final order on 9/21/2011, with respect to a workplace located at 23189 SR 14, Troy, PA.
Recent events (2)
  • — I (R) $7000
  • — Z (R) $7000

1904.39 A02

Other-than-serious 1 instance 1 exposed
Issued
Apr 19, 2016
Penalty
Initial $3,500 · Current $1,000 Reduced
29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours:    a) Troy, PA: The employer reported that an employee had suffered an amputation injury 3 days after the incident occurred.    ABATEMENT OBSERVED DURING INSPECTION  NO CERTIFICATION REQUIRED
Recent events (2)
  • — I (O) $1000
  • — Z (O) $3500

1910.212 A02

Other-than-serious 1 instance 1 exposed
Issued
Apr 19, 2016
Abate by
Jun 6, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.212(a)(2): Guard(s) on machine(s) were not affixed to the machine or secured elsewhere when attachment to the machine was not possible:  a) Debarker Area: A guard rail used to keep workers away from the rotating parts of the debarker was not attached or otherwise affixed to prevent it from being moved or knocked over while the machine is in operation, on or about March 24, 2016.  ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View OAK Hill Veneer, Incorporated's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341251882.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.