WILMINGTON, OH —
OSHA Inspection: CPG INTERNATIONAL LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CPG INTERNATIONAL LLC in 894 PRAIRIE RD., WILMINGTON, OH 45177 (NAICS 326113). OSHA activity number 341323079.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CPG INTERNATIONAL LLC
- Site address
- 894 PRAIRIE RD.
- City
- WILMINGTON
- State
- OH
- ZIP
- 45177
- Mailing
- 894 PRAIRIE RD., WILMINGTON, OH 45177
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326113
- Employees
- 150
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Apr 28, 2016
- Abate by
- May 10, 2016
- Penalty
- Initial $7,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section. a: On 28 February, 2016 the employer did not develop and utilize a procedure to control pneumatic energy associated with gates for the number 5 scale on blending tower.
Recent events (2)
- — I (S) $0
- — Z (S) $7000
1910.147 C06 I B
- Issued
- Apr 28, 2016
- Abate by
- May 10, 2016
- Penalty
- Initial $0 · Current $7,000
General-duty citation text
29 CFR 1910.147(c)(6)(i)(B): The periodic inspection of the hazardous energy control program shall be conducted to correct any deviations or inadequacies identified. a: The employer failed to correct inadequacies in the Lockout/tagout program in that procedures to control the energy controlling pneumatic slide gates was not evaluated and added to Lockout/tagout procedures for the blending tower.
Recent events (2)
- — I (O) $7000
- — Z (S) $0
1910.147 C07 I A
- Issued
- Apr 28, 2016
- Abate by
- May 10, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: (a) Employees performing servicing and maintenance such as but not limited to troubleshooting equipment to the feed tower including pneumatic tube gates, were not trained on the specific procedures necessary for energy isolation and control.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D
- Issued
- Apr 28, 2016
- Abate by
- May 10, 2016
- Penalty
- Initial $7,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: a: Employees performing servicing and maintenance on the Feed tower pneumatic gates were not required to: (1) Know the type and magnitude of the energy, the hazards of the energy to be controlled, and the method or means to control the energy, (2) turn off and shut down the machine (3) physically locate and operate the energy isolating devices in such a manner as to isolate the machine or equipment from the energy source, (4) affix lockout or tagout devices to each energy isolating device, (5) prior to starting work on machines that have been locked out or tagged out, verify that isolation and deenergization of the machine or equipment have been accomplished. On February 28, 2016, employee(s) troubleshooting the Feed tower were exposed to the unexpected start up of the equipment.
Recent events (2)
- — I (S) $0
- — Z (S) $7000
More inspections at CPG International LLC
View CPG International LLC's full OSHA safety record →
More inspections in this industry (NAICS 326113)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341323079.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.