GOODWATER, AL —
OSHA Inspection: MADIX, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MADIX, INC. in 20984 AL HWY 9, GOODWATER, AL 35072 (NAICS 337215). OSHA activity number 341683555.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MADIX, INC.
- Site address
- 20984 AL HWY 9
- City
- GOODWATER
- State
- AL
- ZIP
- 35072
- Mailing
- PO BOX 177, GOODWATER, AL 35072
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337215
- Employees
- 1500
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.23 D01
- Issued
- Nov 16, 2016
- Abate by
- Nov 29, 2016
- Penalty
- Initial $6,663 · Current $4,400 Reduced
General-duty citation text
29 CFR 1910.23(d)(1): Every flight of stairs having four or more risers was not equipped with standard stair railings or standard handrails as specified in paragraphs (d)(1)(i) through (v) of this section: a) Maintenance Shop; On or about August 2, 2016 and at times prior thereto the employer exposed employees to fall hazards in that employees were allowed to walk up and down fixed stairs with four or more risers that did not have a standard stair railing which included a mid-rail. b) Hang Line Staging Area; On or about August 2, 2016 and at times prior thereto the employer exposed employees to fall hazards in that employees were allowed to walk up and down fixed stairs with four or more risers that did not have a standard stair railing which included a mid-rail.
Recent events (2)
- — I (S) $4400
- — Z (S) $6663
1910.147 F03 II D
- Issued
- Nov 16, 2016
- Abate by
- Nov 25, 2016
- Penalty
- Initial $8,329 · Current $4,400 Reduced
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: a) Production Floor; On or about August 2, 2016 and at times prior thereto the employer exposed employees to potential hazardous energies in that employees were allowed to work on the Upright channel role former together without all employees applying a personal lockout device on the energy control lockout point.
Recent events (2)
- — I (S) $4400
- — Z (S) $8329
1910.212 A03 II
- Issued
- Nov 16, 2016
- Abate by
- Nov 29, 2016
- Penalty
- Initial $12,471 · Current $4,400 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Production Floor; On or about July 25, 2016 and at times prior thereto the employer exposed employees to caught-in and crushing hazards in that an employee was allowed to operate the #BP-06 Cincinnati hydraulic power press brake where the point of operation was not guarded.
Recent events (2)
- — I (S) $4400
- — Z (S) $12471
1910.242 B
- Issued
- Nov 16, 2016
- Abate by
- Nov 25, 2016
- Penalty
- Initial $6,663 · Current $4,400 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Bracket Welder Area; On or about August 2, 2016 and at times prior thereto the employer exposed employees to compressed air hazards in that employees were allowed to use compressed air for cleaning that was not reduced to less than thirty p.s.i.
Recent events (2)
- — I (S) $4400
- — Z (S) $6663
1910.255 B04
- Issued
- Nov 16, 2016
- Abate by
- Nov 29, 2016
- Penalty
- Initial $6,663 · Current $4,400 Reduced
General-duty citation text
29 CFR 1910.255(b)(4): All press welding machine operations, where there was a possibility of the operator's fingers being under the point of operation, were not effectively guarded by use of a device such as electronic eye safety circuit, two hand control, or similar protection: a) Welding Area; On or about August 2, 2016 and at times prior thereto the employer exposed employees to crush/amputation hazards in that employees were allowed to operate the LORS press welding machine where the point of operation was not effectively guarded by use of an electronic eye safety circuit, two hand control, or other similar protection as required by the regulation.
Recent events (2)
- — I (S) $4400
- — Z (S) $6663
More inspections at Madix, INC.
View Madix, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337215)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341683555.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.