Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: TEREX UTILITIES, INC.

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of TEREX UTILITIES, INC. in 1300 MARION-AGOSTA ROAD, MARION, OH 43302 (NAICS 811310). OSHA activity number 341780666.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Terex Utilities, INC. — free Get an email when a new federal OSHA severe-injury report for Terex Utilities, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1300 MARION-AGOSTA ROAD
City
MARION
State
OH
ZIP
43302
Mailing
1027 BYERS ROAD, MIAMISBURG, OH 45342
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811310
Employees
10
Ownership type
A

6 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 10 exposed
Issued
Mar 14, 2017
Abate by
Jan 4, 2018
Penalty
Initial $12,675 · Current $10,140 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees:    A)    Terex Utilities, Inc. DBA Terex Services, conducting work at 1300 Marion-Agosta Road, Marion, OH 43302: On or about September 16, 2016, the employer did not ensure that an employee who intended to ride the Whiting 30-ton overhead crane (Serial #12171) service platform into an area with lower overhead clearance was adequately  protected from the overhead hazard while working the West Bay of the Press Room.    Among other methods, a feasible abatement method to correct this hazard is to follow The American Society of Mechanical Engineers Standard (ASME) B30.2-2005: Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist), including Section 2-1.7.1: Construction of Service Platforms.
Recent events (3)
  • — F (S) $10140
  • — C (S) $12675
  • — Z (S) $12675

1910.179 L02 II

Serious Gravity 10 1 instance 1 exposed
Issued
Mar 14, 2017
Abate by
Jan 4, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.179(l)(2)(ii): Cranes were operated before maintenance equipment was removed after adjustments and repairs had been made:     A)    Terex Utilities, Inc. DBA Terex Services, conducting work at 1300 Marion-Agosta Road, Marion, OH 43302: On or about September 16, 2016, after repairs of the Whiting 30-Ton overhead crane (Serial #12171), located in the West Bay of the Press Room, were completed, the employee remained on a crane service platform with a safety lanyard connected to the building's lifeline when the crane operator moved the crane.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.147 E02 II

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Mar 14, 2017
Abate by
Mar 23, 2017
Penalty
Initial $12,675 · Current $0 Reduced
29 CFR 1910.147(e)(2)(ii): After lockout or tagout devices were removed and before machines or equipment is started, affected employees were not notified that the lockout or tagout device(s) have been removed:  A)    Terex Utilities, Inc. DBA Terex Services, conducting work at 1300 Marion-Agosta Road, Marion, OH 43302: On or about September 16, 2016, the employer did not ensure that the work area was checked and the employee had been safely positioned or removed from the hazardous area after the employee completed repairs of the Whiting 30-Ton overhead crane (Serial # 12171), before the energy was restores to the crane, and the crane was moved.
Recent events (3)
  • — F (S) $0
  • — C (S) $12675
  • — Z (S) $12675

1910.147 F02 I

Serious Gravity 10 1 instance 10 exposed
Issued
Mar 14, 2017
Abate by
Jan 4, 2018
Penalty
Initial $12,675 · Current $10,140 Reduced
29 CFR 1910.147(f)(2)(i): When outside servicing personnel were engaged in activities in a facility, the onsite employer and the outside employer did not inform each other of their respective lockout or tagout procedures:     A)    Terex Utilities, Inc. DBA Terex Services, conducting work at 1300 Marion-Agosta Road, Marion, OH 43302: On or about September 16, 2016, the employees conducting work at the above mentioned site relative to crane servicing and repairs, were not provided with the onsite employer's lockout or tagout procedures and any potential differences in the employer's lockout or tagout procedures which were used while conducting the crane servicing and repairs.
Recent events (3)
  • — F (S) $10140
  • — C (S) $12675
  • — Z (S) $12675

1910.332 B01

Serious Gravity 10 1 instance 3 exposed
Issued
Mar 14, 2017
Abate by
Jan 4, 2018
Penalty
Initial $12,675 · Current $10,140 Reduced
29 CFR 1910.332(b)(1): Employees were not trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertained to their respective job assignments:    A)    Terex Utilities, Inc. DBA Terex Services, conducting work at 1300 Marion-Agosta Road, Marion, OH 43302: On or about September 16, 2016, the employer did not provide adequate training to those employees on the subject site on the use of personal protective equipment for the hands, head and body to protect against arc flash hazards when the employee is verifying said de-energization of the Whiting 30-Ton overhead crane and exposed to over 480 volts electrical hazards.
Recent events (3)
  • — F (S) $10140
  • — C (S) $12675
  • — Z (S) $12675

1910.335 A01 I

Deleted Serious Gravity 10 1 instance 3 exposed
Issued
Mar 14, 2017
Abate by
Mar 23, 2017
Penalty
Initial $12,675 · Current $0 Reduced
29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not using electrical protective equipment that was appropriate for the specific parts of the body to be protected and for the work to be performed:  A)    Terex Utilities, Inc. DBA Terex Services, conducting work at 1300 Marion-Agosta Road, Marion, OH 43302: On or about September 16, 2016, the employer did not ensure that employees, who were checking electrical connectors of the Whiting 30-Ton overhead crane (Serial # 12171) were using proper electrical personal protective equipment for the hands, head, and body. The employees were exposed to 480 volts electrical hazards.
Recent events (3)
  • — F (S) $0
  • — C (S) $12675
  • — Z (S) $12675

View Terex Utilities, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341780666.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.