Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CONCORD SUPPLY INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of CONCORD SUPPLY INC. in 9594 S. PRESA STREET, SAN ANTONIO, TX 78223 (NAICS 326112). OSHA activity number 341932473.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Concord Supply INC. — free Get an email when a new federal OSHA severe-injury report for Concord Supply INC. is published. One employer, no account, unsubscribe in one click.
Establishment
CONCORD SUPPLY INC.
Site address
9594 S. PRESA STREET
City
SAN ANTONIO
State
TX
ZIP
78223
Mailing
9594 S. PRESA STREET, SAN ANTONIO, TX 78223
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326112
Employees
40
Ownership type
A

6 citations on file for this inspection.

1910.212 A01

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 22, 2017
Penalty
Initial $8,873 · Current $5,000 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:     Printing Machine:  On or about November 23, 2016 and at times prior thereto, employees were exposed to a caught-in hazard, from rotating parts while performing a quality check (tape test) near the printer out-feed rollers.
Recent events (2)
  • — I (S) $5000
  • — Z (S) $8873

1910.219 C02 I

Other-than-serious 2 instances 2 exposed
Issued
Feb 22, 2017
Penalty
Initial $5,070 · Current $2,000 Reduced
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting:     a)  Printing machine:  On or about November 23, 2016, and at times prior thereto, employees were exposed to a caught-in hazard while working near the printer in-feed drive motor which had an unguarded coupling shaft that connected the motor to the gear box.    b)  Printing machine:  On or about November 23, 2016, and at times prior thereto, employees were exposed to a caught-in hazard while working near the printer out-feed drive motor which had an unguarded coupling shaft that connected the motor to the gear box.
Recent events (2)
  • — I (O) $2000
  • — Z (S) $5070

1910.219 C04 I

Serious Gravity 5 2 instances 2 exposed
Issued
Feb 22, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft:  a)  Printing machine:  On or about November 23, 2016, and at times prior thereto, employees were exposed to a caught-in hazard while working near the printer in-feed drive motor which had an unguarded rotating shaft that projected from the gear box.  b)  Printing machine:  On or about November 23, 2016, and at times prior thereto, employees were exposed to a caught-in hazard while working near the printer out-feed drive motor which had an unguarded rotating shaft that projected from the gear box.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.305 A01 I

Other-than-serious 1 instance 2 exposed
Issued
Feb 22, 2017
Penalty
Initial $5,070 · Current $2,000 Reduced
29 CFR 1910.305(a)(1)(i): Metal raceways, cable armor, and other metal enclosures for conductors were not connected to all boxes, fittings, and cabinets to provide effective electrical continuity:    Printing machine:  On or about November 23, 2016 and at times prior thereto, employees were exposed to electrical hazards while the electrical conduit of a 120 Vac metal receptacle box was pulled away from the connector exposing the conduits internal wiring.
Recent events (2)
  • — I (O) $2000
  • — Z (S) $5070

1910.305 B01 II

Serious Gravity 5 2 instances 2 exposed
Issued
Feb 22, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:   a)  Printing machine:  On or about November 23, 2016, and at times prior thereto, employees were exposed to electrical hazards while a 120 Vac metal light switch box had a missing knock out.  b)  Printing machine:  On or about November 23, 2016, and at times prior thereto, employees were exposed to electrical hazards while a 120 Vac metal junction box for the blue ink pump had a missing knock out.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.334 A02 I

Other-than-serious 1 instance 2 exposed
Issued
Feb 22, 2017
Penalty
Initial $5,070 · Current $0 Reduced
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket):    Printing machine:  On or about November 23, 2016, and at times prior thereto, employees were exposed to electrical hazards while the electrical cord of the yellow ink pump motor was frayed exposing the cord's internal wiring.
Recent events (2)
  • — I (O) $0
  • — Z (S) $5070

View Concord Supply INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341932473.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.