SAN ANTONIO, TX —
OSHA Inspection: CONCORD SUPPLY INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CONCORD SUPPLY INC. in 9594 S. PRESA STREET, SAN ANTONIO, TX 78223 (NAICS 326112). OSHA activity number 345720866.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONCORD SUPPLY INC.
- Site address
- 9594 S. PRESA STREET
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78223
- Mailing
- 9594 S. PRESA STREET, SAN ANTONIO, TX 78223
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326112
- Employees
- 35
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.22 D01
- Issued
- Mar 3, 2022
- Penalty
- Initial $4,351 · Current $2,611 Reduced
General-duty citation text
29 CFR 1910.22(d)(1): The employer did not ensure that walking-working surfaces are inspected, regularly and as necessary, and maintained in a safe condition: Extruder walkaway area, 9594 S. Presa St, San Antonio, TX: On or about January 11, 2022 and at times prior thereto, workers were exposed to trip hazards while using a stairway with damaged steps and a missing hand rail system.
Recent events (2)
- — I (S) $2610.6
- — Z (S) $4351
1910.22 D02
- Issued
- Mar 3, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(d)(2):29 CFR 1910.22(d)(2): The employer did not ensure that hazardous conditions on walking-working surfaces are corrected or repaired before an employee uses the walking-working surface again. The employer did not ensure that if the correction or repair cannot be made immediately, the hazard is guarded to prevent employees from using the walking-working surface until the hazard is corrected or repaired: Extruder walkaway area, 9594 S. Presa St, San Antonio, TX: On or about January 11, 2022 and at times prior thereto, the employer did not repair a broken stairway and missing handrail, exposing workers to trip and fall hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 A04
- Issued
- Mar 3, 2022
- Abate by
- Mar 23, 2022
- Penalty
- Initial $8,702 · Current $5,221 Reduced
General-duty citation text
29 CFR 1910.178(a)(4):Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: Splitter machine area, 9594 S. Presa St, San Antonio, TX: On or about January 11, 2022 and at times prior thereto, workers were exposed to crushing hazards while operating a Hyster 80 model forklift with a modified carpet pole attachment with an unaccounted weight load capacity.
Recent events (2)
- — I (S) $5221.2
- — Z (S) $8702
1910.178 A05
- Issued
- Mar 3, 2022
- Abate by
- Mar 29, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(5):The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: Splitter machine area, 9594 S. Presa St, San Antonio, TX: On or about January 11, 2022 and at times prior thereto, workers were exposed to tipping hazards while operating a Hyster 80 model forklift with a modified carpet pole attachment with an unaccounted weight load capacity.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.184 H05 V
- Issued
- Mar 3, 2022
- Penalty
- Initial $7,252 · Current $4,351 Reduced
General-duty citation text
29 CFR 1910.184(h)(5)(v):Natural or synthetic fiber rope sling(s) with discoloration or rotting were not immediately removed from service: a) Extruder location, 9594 S. Presa St, San Antonio, TX: On or about January 11, 2022, and at times prior thereto, workers were exposed to crushing hazards while operating overhead cranes with visibly soiled and damaged load straps. b) Printer machine & unwinder area, 9594 S Presa St, San Antonio, TX: On or about January 11, 2022, and at times prior thereto, workers were exposed to crushing hazards while operating overhead cranes with visibly soiled and damaged load straps.
Recent events (2)
- — I (S) $4351.2
- — Z (S) $7252
More inspections at Concord Supply INC.
View Concord Supply INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326112)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345720866.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.