ROME, NY —
OSHA Inspection: BUCK CONSTRUCTION, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of BUCK CONSTRUCTION, LLC in DELTA LUXURY APARTMENTS, 7801 MERRICK ROAD, ROME, NY 13440 (NAICS 236116). OSHA activity number 341970663.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BUCK CONSTRUCTION, LLC
- Site address
- DELTA LUXURY APARTMENTS, 7801 MERRICK ROAD
- City
- ROME
- State
- NY
- ZIP
- 13440
- Mailing
- 105 MAIN STREET, WHITESBORO, NY 13492
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236116
- Employees
- 50
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.453 B02 V
- Issued
- Jan 13, 2017
- Abate by
- May 25, 2017
- Penalty
- Initial $6,236 · Current $6,236
General-duty citation text
29 CFR 1926.453(b)(2)(v): A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift: a) Southwest corner of building, on or about 12-6-16: Two employees were in an articulating, extensible boom, aerial lift, without a safety harness or body belt connected, exposing the employees to a fall hazard of in excess of 24 feet. ABATEMENT CERTIFICATION IS REQUIRED FOR THIS ITEM
Recent events (3)
- — F (O) $6236
- — C (S) $6236
- — Z (S) $6236
1926.501 B01
- Issued
- Jan 13, 2017
- Abate by
- May 25, 2017
- Penalty
- Initial $6,236 · Current $6,236
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: a) Southwest corner of building, roof/dormer area, on or about 12-6-16: Two employees were working on a roof and were not protected from falls, exposing the employees to a fall hazard of 19 feet 6 inches to the ground below. b) Southwest corner of building, roof/dormer area, on or about 12-6-16: Two employees were working on an elevated job-made work platform and were not protected from falls, exposing the employees to a fall hazard of 19 feet 6 inches to the ground below. ABATEMENT CERTIFICATION IS REQUIRED FOR THIS ITEM
Recent events (3)
- — F (O) $6236
- — C (S) $6236
- — Z (S) $6236
1926.602 C01 II
- Issued
- Jan 13, 2017
- Abate by
- May 25, 2017
- Penalty
- Initial $6,236 · Current $6,236
General-duty citation text
29 CFR 1926.602(c)(1)(ii): Modifications or additions which affect the capacity or safe operation of the equipment were made without the manufacturer's written approval: a) Southwest corner of building, on or about 12-6-16: Two employees were working on an elevated job-made work platform attached to the forks of a rough terrain lift, without manufacturers written approval, exposing the employees to a fall hazard of 18 feet to the ground below. ABATEMENT CERTIFICATION IS REQUIRED FOR THIS ITEM
Recent events (3)
- — F (O) $6236
- — C (S) $6236
- — Z (S) $6236
1926.602 C01 VIII A
- Issued
- Jan 13, 2017
- Abate by
- May 25, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.602(c)(1)(viii)(A): The platform was not firmly secured to the lifting carriage and/or forks: a) Southwest corner of building, on or about 12-6-16: Two employees were working on an elevated job-made work platform attached to the forks of a rough terrain lift, which was not secured to the forks or backrest, exposing the employees to a fall hazard of 18 feet to the ground below. ABATEMENT CERTIFICATION IS REQUIRED FOR THIS ITEM
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
1926.602 C01 VI
- Issued
- Jan 13, 2017
- Abate by
- May 25, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.602(c)(1)(vi): Industrial truck(s) in use did not meet the applicable requirements of design, construction, stability, inspection, testing, maintenance, and operation, as defined in American National Standards Institute B56.1-1969, Safety Standards for Powered Industrial Trucks: a) Southwest corner of building, on or about 12-6-16: Two employees were working on an elevated job-made work platform attached to the forks of a rough terrain lift that did not meet the stability requirements in accordance with American National Standards Institute (ANSI) B56.1-1969, in that the platform extended 24 inches beyond the width of the machine, in excess of the 10 inch maximum, exposing the employees to a fall hazard of 18 feet to the ground below. ABATEMENT CERTIFICATION IS REQUIRED FOR THIS ITEM
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
More inspections at Buck Construction, LLC
View Buck Construction, LLC's full OSHA safety record →
More inspections in this industry (NAICS 236116)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341970663.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.