MISSOULA, MT —
OSHA Inspection: J&R PLANING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of J&R PLANING, INC. in 3280 RASER DRIVE, MISSOULA, MT 59808 (NAICS 321912). OSHA activity number 342041795.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J&R PLANING, INC.
- Site address
- 3280 RASER DRIVE
- City
- MISSOULA
- State
- MT
- ZIP
- 59808
- Mailing
- 3280 RASER DRIVE, MISSOULA, MT 59808
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321912
- Employees
- 41
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.28 B01 I
- Issued
- Mar 29, 2017
- Abate by
- Apr 24, 2017
- Penalty
- Initial $4,310 · Current $2,586 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that was 4 feet (1.2 m) or more above a lower level was protected from falling by one or more of the following: Guardrail systems, safety net systems, or personal fall arrest systems: a) J & R Planing, East Cyclone: On January 19, 2016 and at times prior employees were exposed to a fall hazard of approximately 9 feet from the elevated platform of the cyclone while clearing the machine. b) J & R Planing, North Cyclone: On January 19, 2016 and at times prior employees were exposed to a fall hazard of approximately 16 feet from the elevated platform of the cyclone while clearing the machine.
Recent events (2)
- — I (S) $2586
- — Z (S) $4310
1910.305 G01 IV A
- Issued
- Mar 29, 2017
- Abate by
- Apr 24, 2017
- Penalty
- Initial $3,232 · Current $1,939 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a) J & R Planing, North wall moulder: On January 19, 2017 and at times prior employees were exposed to fire and shock hazards while using temporary wiring to energize a lamp inside of the moulder. b) J & R Planing, South wall Hand Hewn: On January 19, 2017 and at times prior employees were exposed to fire and shock hazards while using temporary wiring to energize various parts of the hand hewn saw.
Recent events (2)
- — I (S) $1939.2
- — Z (S) $3232
1910.305 G02 III
- Issued
- Mar 29, 2017
- Abate by
- Apr 24, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: a) J & R Planing, North wall facility: On January 19, 2016 and at times prior employees were exposed to shock hazards while using the portable work light with direct strain on the terminal screws exposing the electrical conductors.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L01 II
- Issued
- Mar 29, 2017
- Abate by
- Apr 24, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck: a) J & R Planing Facility: On January 19, 2016 and at times prior employees were exposed to the hazards associated with incomplete training prior to operating the powered industrial trucks.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at J&R Planing, INC.
View J&R Planing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321912)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342041795.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.