WRANGELL, AK —
OSHA Inspection: WRANGELL BOATSHOP LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WRANGELL BOATSHOP LLC in 701 CASE AVENUE, WRANGELL, AK 99929 (NAICS 336612). OSHA activity number 342047016.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WRANGELL BOATSHOP LLC
- Site address
- 701 CASE AVENUE
- City
- WRANGELL
- State
- AK
- ZIP
- 99929
- Mailing
- PO BOX 990, WRANGELL, AK 99929
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336612
- Employees
- 9
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.213 A09
- Issued
- Feb 21, 2017
- Abate by
- Mar 21, 2017
- Penalty
- Initial $2,309 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.213(a)(9): All belts, pulleys, gears, shafts, and moving parts shall be guarded in accordance with the specific requirements of 1910.219. Shop Area: On or about 18 January 2017 and times prior thereto, the 24" American Woodworking Machinery Planer, Branch No. 10, had exposed spindles, pulleys and belts. This condition exposed employees to a struck by and caught in hazard.
Recent events (2)
- — I (S) $1500
- — Z (S) $2309
1910.213 H01
- Issued
- Feb 21, 2017
- Abate by
- Mar 21, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the machine: Shop Area: On or about 18 January 2017 and times prior thereto, the 10" Black and Decker Radial Arm Saw side guards were missing. This condition exposed employees to an amputation hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 I01
- Issued
- Feb 21, 2017
- Abate by
- Mar 21, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(i)(1): Non-working portion(s) of the blade of bandsaw(s) were not enclosed or guarded: Shop Area: On or about 18 January 2017 and times prior thereto, the Large Wood Ban Saw had sections of the non-working areas of the blade exposed to employees operating the equipment. This condition exposed employees to an amputation hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B01 I
- Issued
- Feb 21, 2017
- Abate by
- Mar 21, 2017
- Penalty
- Initial $1,385 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(i): Openings through which conductors entered cutout boxes, cabinets, or fittings were not effectively closed. Shop area, Large Band Saw: On or about 18 January 2017 and times prior thereto, the 120 volt electrical circuit panel was missing a knock-out. This condition exposed employees to an electrical shock and burn hazard.
Recent events (2)
- — I (S) $1000
- — Z (S) $1385
1910.305 J01 I
- Issued
- Feb 21, 2017
- Abate by
- Mar 21, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(j)(1)(i): Fixtures, lampholders, lamps, rosettes, and receptacles located had live parts normally exposed to employee contact: Small side, outside of shop area: On or about 18 January 2017 and times prior thereto, a 120 volt electrical outlet had a damaged outlet cover. This condition exposed employees to an electrical shock and burn hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1915.134 B
- Issued
- Feb 21, 2017
- Abate by
- Mar 21, 2017
- Penalty
- Initial $1,385 · Current $1,000 Reduced
General-duty citation text
29 CFR 1915.134(b): Work rests were not kept a distance not to exceed 1/8 inch from the surface of the wheel. Shop, Tool and welding area: On or about 18 January 2017 and times prior thereto, the work rest on the 10" Bench Grinder measured at approx.1/4 inch. This exposed employees to struck-by hazard from work piece getting stuck between rest and wheel causing wheel to break.
Recent events (2)
- — I (S) $1000
- — Z (S) $1385
1910.334 A02 I
- Issued
- Feb 21, 2017
- Abate by
- Mar 21, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket) Shop Area: On or about 18 January 2017 and times prior thereto, the 10" Black and decker Radial Arm saw power cord had evidence of insulation damage. this condition exposed employees to an electrical shock and burn hazard.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Wrangell Boatshop LLC
View Wrangell Boatshop LLC's full OSHA safety record →
More inspections in this industry (NAICS 336612)
More inspections in AK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342047016.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.