NASHVILLE, TN —
OSHA Inspection: WILLIAMS MECHANICAL LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of WILLIAMS MECHANICAL LLC in 1310 SOUTH 24TH ST., NASHVILLE, TN 37212 (NAICS 238220). OSHA activity number 342088499.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WILLIAMS MECHANICAL LLC
- Site address
- 1310 SOUTH 24TH ST.
- City
- NASHVILLE
- State
- TN
- ZIP
- 37212
- Mailing
- 711 JOHNSON HOLLOW RD, MC EWEN, TN 37101
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238220
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Apr 7, 2017
- Abate by
- May 5, 2017
- Penalty
- Initial $8,873 · Current $6,873 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees exposed to caught-in/between and/or crushing hazards. a) 1310 South 24th St. Nashville, TN - On or about 2/7/17, employees walking next to/under and or in close proximity of the SKYJACK Tele Handler when moving pipe were exposed to being run over and or crushed. In accordance with 29 CFR 1903.19(c), abatement documentation and certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $6873
- — Z (S) $8873
1926.21 B02
- Issued
- Apr 7, 2017
- Abate by
- Apr 19, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe condition(s) and the regulation(s) applicable to his work environment to control or eliminate any hazard(s) or other exposure to illness or injury: a) 1310 S. 24th St Nashville, TN - On or about 2/6/17, employees were exposed to struck-by and crushing hazards when walking next to/under the SKYJACK Telehandler (a rough terrain forklift) in operation while carrying a load. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L03 I M
- Issued
- Apr 7, 2017
- Abate by
- Apr 19, 2017
- Penalty
- Initial $6,338 · Current $4,338 Reduced
General-duty citation text
29 CFR 1910.178(l)(3)(i)(M): Any other operating instructions, warnings, or precautions listed in the operator's manual for the types of vehicle that the employee is being trained to operate. a) 1310 South 24th St. Nashville, TN - On or about 2/7/17, the employer train the operator of the SKYJACY Tele Handler rough terrain forklift on the equipment's Operating Manual, specifically the safety precautions. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $4338
- — Z (S) $6338
1910.178 L06
- Issued
- Apr 7, 2017
- Abate by
- May 5, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator had been trained and evaluated as required by paragraph (l) through a certification that included the name of the operator, the date of the training, that date of evaluation, and the identity of the person(s) performing the training or evaluation: a) 1310 South 24th St. Nashville, TN - On or about 2/7/17, the employer did not certify that the operator was trained and evaluated to operate the rough terrain forklift (lull). In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.250 A01
- Issued
- Apr 7, 2017
- Abate by
- Apr 19, 2017
- Penalty
- Initial $6,338 · Current $0 Reduced
General-duty citation text
29 CFR 1926.250(a)(1): Materials stored in tiers were not stacked, racked, blocked, interlocked, or otherwise secured to prevent sliding, falling or collapse: a) 1310 South 24th St. Nashville, TN - On or about 2/7/17, employees were exposed to struck-by hazards when multiple 21 foot long steel pipe was stacked high on top of each other and was not secured properly. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $0
- — Z (S) $6338
More inspections at Williams Mechanical LLC
View Williams Mechanical LLC's full OSHA safety record →
More inspections in this industry (NAICS 238220)
More inspections in TN
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342088499.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.