LITTLETON, CO —
OSHA Inspection: MARTIN MARIETTA
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MARTIN MARIETTA in 9511 TITAN PARK CIRCLE, LITTLETON, CO 80125 (NAICS 327320). OSHA activity number 342399672.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARTIN MARIETTA
- Site address
- 9511 TITAN PARK CIRCLE
- City
- LITTLETON
- State
- CO
- ZIP
- 80125
- Mailing
- 1627 COLE BLVD SUITE 200, LAKEWOOD, CO 80401
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327320
- Employees
- 8000
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.110 B06 I
- Issued
- Jul 10, 2017
- Penalty
- Initial $5,432 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.110(b)(6)(i): Containers and first stage regulating equipment of liquid petroleum gases were not located outside of the building: (a) On or about June 15, 2017, and at times prior, employees were exposed to explosion and fire hazards from two propane tanks that were stored inside in the garage area of the shop. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (O) $2500
- — Z (S) $5432
1910.215 A04
- Issued
- Jul 10, 2017
- Abate by
- Jul 18, 2017
- Penalty
- Initial $5,432 · Current $5,432
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) On or about June 15, 2017, and at times prior, the employer exposed employees to stuck-by hazards due to the bench grinder work rest, located in the garage area, not being adjusted to one eighth inch. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (O) $5432
- — Z (S) $5432
1910.215 B09
- Issued
- Jul 10, 2017
- Abate by
- Jul 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) On June 15, 2017, the employer exposed employees in the garage area to struck-by hazards due to bench grinder tongue guard exceeding one fourth inch. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 G01
- Issued
- Jul 10, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: (a) On or about June 15, 2017, and at times prior, the employer did not maintain a clear distance of three feet in front of the circuit breaker panel in order to provide access for emergency maintenance. Abatement Note: Abatement certification is not required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 F05 II
- Issued
- Jul 10, 2017
- Abate by
- Jul 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(5)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the appropriate hazard warnings: (a) On or about June 15, 2017, and at times prior, employees were exposed to hazardous chemicals in that a 50 gallon drum of Concure Systems Admixture, located in the garage area, was not labeled, tagged or marked with the appropriate hazard warnings. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Martin Marietta
View Martin Marietta's full OSHA safety record →
More inspections in this industry (NAICS 327320)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342399672.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.