Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BACZYNSKI MASONRY, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BACZYNSKI MASONRY, INC. in 2918 N. LAKEWOOD AVE., CHICAGO, IL 60657 (NAICS 238140). OSHA activity number 342507688.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Baczynski Masonry, INC. — free Get an email when a new federal OSHA severe-injury report for Baczynski Masonry, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2918 N. LAKEWOOD AVE.
City
CHICAGO
State
IL
ZIP
60657
Mailing
1873 BENNETT PL, DES PLAINES, IL 60016
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
7
Ownership type
A

3 citations on file for this inspection.

1910.178 L01 I

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Aug 16, 2017
Abate by
Sep 19, 2017
Penalty
Initial $2,716 · Current $0 Reduced
29 CFR 1926.602(d): Note: The requirements applicable to construction work under paragraph (d) of this section are identical to those set forth at paragraph (l) of 29 CFR 1910.178:      29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):     a) On or about July 26, 2017, the employer did not train and evaluate employees operating the Pettibone T8044 all-terrain forklift.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $2716

1926.501 B01

Serious Gravity 10 1 instance 1 exposed
Issued
Aug 16, 2017
Abate by
Aug 22, 2017
Penalty
Initial $3,803 · Current $2,000 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:     a)  On July 26, 2017, employees engaged in masonry work were not protected from fall hazards while working at an elevation of approximately 25 feet above the ground.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $3803

1926.502 B02

Serious Gravity 10 1 instance 3 exposed
Issued
Aug 16, 2017
Penalty
Initial $0 · Current $0
29 CFR 1926.502(b)(2): Midrails, screens, mesh, intermediate vertical members, or equivalent intermediate structure members were not installed between the top edge of the guardrail system and the walking/working surface when there was no wall or parapet wall at least 21 inches (53 cm) high:  a)  On July 26, 2017, employees engaged in masonry work were exposed to a fall hazard of approximately 13 feet to the lower level while working around floor opening that was not adequately protected.  The floor opening was cordoned off by the use of a railing system that did not have midrails installed between the top edge of the railing system and the walking/working surface.     No abatement certification or documentation is required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Baczynski Masonry, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342507688.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.