TROY, OH —
OSHA Inspection: TROY LAMINATING AND COATING, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of TROY LAMINATING AND COATING, INC. in 421 S UNION ST, TROY, OH 45373 (NAICS 322220). OSHA activity number 342984671.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TROY LAMINATING AND COATING, INC.
- Site address
- 421 S UNION ST
- City
- TROY
- State
- OH
- ZIP
- 45373
- Mailing
- 421 S UNION ST, TROY, OH 45373
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322220
- Employees
- 65
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C06 I
- Issued
- Aug 13, 2018
- Abate by
- Dec 31, 2018
- Penalty
- Initial $7,114 · Current $7,960
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. (a) The periodic inspection of the energy control program was inadequate, in that it did not include a review of each machine specific procedure for each type of equipment, to include the slitters, coaters, compressors and rewinders.
Recent events (2)
- — I (S) $7960
- — Z (S) $7114
1910.147 C07 I
- Issued
- Aug 13, 2018
- Abate by
- Dec 31, 2018
- Penalty
- Initial $19,918 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: (a) Employees cleaning the rubber roll on the release station on the #475 Coater Line, were not adequately trained on the energy control program, such as when and how to attach locks to the energy isolating devices, prior to cleaning the rubber roll. (b) Employees cleaning the blade and bar on the Wintech rewinder on the #475 Coater Line, were not adequately trained on the energy control program, such as when and how to attach locks to the energy isolating devices, prior to cleaning the blade and the bar. Troy Laminating and Coating, Inc. was previously cited for a violation of this occupational safety and health standard, or its equivalent standard, which was contained in OSHA inspection number 892734, Citation Number 2, Item Number 2 and was affirmed as a final order on August 21, 2013, with respect to a workplace located at 421 S. Union Street, Troy, OH 45373.
Recent events (2)
- — I (R) $0
- — Z (R) $19918
1910.147 D
- Issued
- Aug 13, 2018
- Abate by
- Dec 31, 2018
- Penalty
- Initial $19,918 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: (a) On or about Feb 22, 2018, employees cleaning the rubber roll on the release station on the #475 Coater Line, were not required to: turn off and shut down the machines, physically locate and operate energy isolating devices in such a manner as to isolate the machine or equipment from the electric, pneumatic and vacuum energy sources, affix lockout or tagout devices to each energy isolating device. (b) Employees cleaning the blade and bar on the Wintech rewinder on the #475 Coater Line, were not required to: turn off and shut down the machines, physically locate and operate energy isolating devices in such a manner as to isolate the machine or equipment from the electric, pneumatic and vacuum energy sources, affix lockout or tagout devices to each energy isolating device. Troy Laminating and Coating, Inc. was previously cited for a violation of this occupational safety and health standard, or its equivalent standard, which was contained in OSHA inspection number 892734, Citation Number 1, Item Number 1 and Citation 2, Item 3, and was affirmed as a final order on August 21, 2013, with respect to a workplace located at 421 S. Union Street, Troy, OH 45373.
Recent events (2)
- — I (R) $0
- — Z (R) $19918
More inspections at Troy Laminating and Coating, INC.
View Troy Laminating and Coating, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 322220)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342984671.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.