EAU CLAIRE, WI —
OSHA Inspection: DYNAMIC FITNESS & STRENGTH, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DYNAMIC FITNESS & STRENGTH, LLC in 2020 PRAIRIE LANE, EAU CLAIRE, WI 54703 (NAICS 339920). OSHA activity number 342993151.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DYNAMIC FITNESS & STRENGTH, LLC
- Site address
- 2020 PRAIRIE LANE
- City
- EAU CLAIRE
- State
- WI
- ZIP
- 54703
- Mailing
- 2020 PRAIRIE LANE, EAU CLAIRE, WI 54703
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339920
- Employees
- 27
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.213 C01
- Issued
- Jul 27, 2018
- Penalty
- Initial $7,114 · Current $4,625 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: (a) The platform building area; The employer did not ensure that a handfed circular table saw used for ripping wood was guarded.
Recent events (2)
- — I (S) $4625
- — Z (S) $7114
1910.213 C02
- Issued
- Jul 27, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: (a) The platform building area; The employer did not ensure that a handfed circular table saw used for ripping wood was equipped with a spreader to ensure material would not squeeze together during cutting.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Jul 27, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: (a) The platform building area; The employer did not ensure that a handfed circular table saw used for ripping wood was equipped with an anti-kickback device.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G02 II
- Issued
- Jul 27, 2018
- Penalty
- Initial $7,114 · Current $4,625 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap: (a) The platform building area; The flexible cord on the portable circular saw had a splice that was not adequately insulated.
Recent events (2)
- — I (S) $4625
- — Z (S) $7114
1910.1200 G08
- Issued
- Jul 27, 2018
- Abate by
- Sep 17, 2018
- Penalty
- Initial $4,268 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not ensure that safety data sheets were readily accessible to the employees in their work area during each work shift: (a) Throughout the facility; The employer did not ensure that safety data sheets were available to employees for chemicals such as but not limited to battery acids, paints, lacquers, thinners and cleaning agents.
Recent events (2)
- — I (S) $1000
- — Z (S) $4268
1910.132 D01
- Issued
- Jul 27, 2018
- Abate by
- Sep 17, 2018
- Penalty
- Initial $798 · Current $519 Reduced
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): (a) Throughout the facility; The employer did not complete a hazard assessment for each workplace to determine if personal protective equipment (PPE) was required as a hazard control method.
Recent events (2)
- — I (O) $519
- — Z (O) $798
More inspections at Dynamic Fitness & Strength, LLC
View Dynamic Fitness & Strength, LLC's full OSHA safety record →
More inspections in this industry (NAICS 339920)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342993151.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.