TOLEDO, OH —
OSHA Inspection: TOLEDO TOOL & DIE COMPANY, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of TOLEDO TOOL & DIE COMPANY, INC. in 105 WEST ALEXIS ROAD, TOLEDO, OH 43612 (NAICS 332116). OSHA activity number 343036539.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Toledo Tool & DIE Company, INC. — free
Get an email when a new federal OSHA severe-injury report for Toledo Tool & DIE Company, INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- TOLEDO TOOL & DIE COMPANY, INC.
- Site address
- 105 WEST ALEXIS ROAD
- City
- TOLEDO
- State
- OH
- ZIP
- 43612
- Mailing
- 105 WEST ALEXIS ROAD, TOLEDO, OH 43612
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- Employees
- 245
- Ownership type
- A
Citations
5 citations on file for this inspection.
1903.19 D01
- Issued
- Mar 6, 2020
- Abate by
- Mar 17, 2020
- Penalty
- Initial $974 · Current $0 Reduced
General-duty citation text
29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required. a. Toledo Tool & Die Company, Inc. located in Toledo, OH: On or about March 6, 2020 the employer did not provide documentation demonstrating that abatement was completed for Citation 1 Item 1b which became a final order on October 21, 2019.
Recent events (3)
- — F (O) $0
- — C (O) $974
- — Z (O) $974
1910.147 C07 I
- Issued
- Aug 17, 2018
- Abate by
- Aug 28, 2018
- Penalty
- Initial $9,147 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls were acquired by employees. a. Toledo Tool & Die Company, Inc. located in Toledo, Ohio: On or about March 23, 2018, the employer did not ensure employees performing die setting on the 150 ton Aida press #81 located in the production area, were trained to lockout the equipment during die setting operations. The employee was exposed to crushing injuries between the upper and lower dies when performing the work. b. Toledo Tool & Die Company, Inc. located in Toledo, Ohio: On or about March 23, 2018, the employer did not ensure an employee performing a steel coil change over on the 250 ton Komatsu press #90 located in the production area, was trained to lockout the equipment during coil changeover operations. The employee was exposed to crushing injuries between the upper and lower dies when performing the work.
Recent events (3)
- — F (S) $0
- — C (S) $9147
- — Z (S) $9147
1910.147 D
- Issued
- Aug 17, 2018
- Abate by
- Nov 1, 2019
- Penalty
- Initial $0 · Current $9,147
General-duty citation text
29 CFR 1910.147(d): The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence. a. Toledo Tool & Die Company, Inc. located in Toledo, Ohio: On or about March 23, 2018, the employer did not ensure an employee performing die setting on the 150 ton Aida press #81 located in the production area, locked out the equipment prior to performing the task. The employee was exposed to crushing injuries between the upper and lower dies when performing the work. b. Toledo Tool & Die Company, Inc. located in Toledo, Ohio: On or about March 23, 2018, the employer did not ensure an employee performing a steel coil change over on the 250 ton Komatsu press #90 located in the production area, locked out the equipment prior to feeding steel through the die area. The employee was exposed to crushing injuries between the upper and lower dies when performing the work.
Recent events (4)
- — P (S) $9147
- — F (S) $9147
- — C (S) $0
1910.217 B07 III
- Issued
- Aug 17, 2018
- Abate by
- Nov 1, 2019
- Penalty
- Initial $9,147 · Current $4,593 Reduced
General-duty citation text
29 CFR 1910.217(b)(7)(iii): A means of selecting Off, "Inch," Single Stroke, and Continuous (when the continuous function is furnished) shall be supplied with the clutch/brake control to select type of operation of the press. Fixing of selection shall be by means capable of supervision by the employer. a. Toledo Tool & Die Company, Inc. located in Toledo, Ohio: On or about March 23, 2018, the employer did not ensure the #91 250 ton Aida part revolution mechanical power press, was equipped with a supervised cycle selection switch. The switch was malfunctioning and could be turned from inch mode to continuous mode without a key.
Recent events (3)
- — F (S) $4593
- — C (S) $9147
- — Z (S) $9147
1910.217 C01 I
- Issued
- Aug 17, 2018
- Abate by
- Nov 1, 2019
- Penalty
- Initial $25,609 · Current $13,260 Reduced
General-duty citation text
29 CFR 1910.217(c)(1)(i): The employer did not provide and insure the usage of "point of operation guards" or properly applied and adjusted point of operation devices on every operation performed on a mechanical power press. a. Toledo Tool & Die Company, Inc. located in Toledo, Ohio: On or about March 23, 2018, the employer did not ensure employees operating the #90 250 ton Komatsu part revolution mechanical power press, were protected from point of operation hazards in that the light curtains were placed 14 inches back from the machine and allowed employees to place their bodies between the light curtains and the press. Toledo Tool & Die Company, Inc. was previously cited for a violation of an equivalent occupational safety and health standard 1910.217(c)(1)(I), which was contained in OSHA inspection number 1096665, citation number 1, item 2 and was affirmed as a final order on March 23, 2016, with respect to a workplace located at 105 West Alexis Road, Toledo, Ohio.
Recent events (3)
- — F (S) $13260
- — C (R) $25609
- — Z (R) $25609
More inspections at Toledo Tool & DIE Company, INC.
Nov 21, 2025
PIONEER, OH
Sep 20, 2023
TOLEDO, OH
Oct 6, 2015
TOLEDO, OH
May 4, 2015
TOLEDO, OH
Mar 18, 2008
TOLEDO, OH
View Toledo Tool & DIE Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332116)
Apr 23, 2026
Tecklane Manufacturing, INC. · SPRINGDALE, PA
Feb 10, 2026
Blase Manufacturing Company · STRATFORD, CT
Jan 7, 2026
110505 - RAO Manufacturing Company · MINNEAPOLIS, MN
Dec 2, 2025
110353 - M-M Manufacturing INC DBA Product Fabricators · PINE CITY, MN
Aug 27, 2025
68342 - Cannon Automotive Solutions - Bowling Green INC · RICHARDSVILLE, KY
More inspections in OH
Jul 17, 2026
Teknol, INC. · DAYTON, OH
Jul 16, 2026
Lippert · PAYNE, OH
Jul 16, 2026
Provia · SUGARCREEK, OH
Jul 16, 2026
Greenacres Foundation · CINCINNATI, OH
Jul 16, 2026
Whirlaway Corporation · WELLINGTON, OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343036539.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.