TEA, SD —
OSHA Inspection: HARVARD INTEGRATIONS, LP
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HARVARD INTEGRATIONS, LP in 27157 470TH AVENUE, TEA, SD 57064 (NAICS 332311). OSHA activity number 343044970.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HARVARD INTEGRATIONS, LP
- Site address
- 27157 470TH AVENUE
- City
- TEA
- State
- SD
- ZIP
- 57064
- Mailing
- 27157 470TH AVENUE, TEA, SD 57064
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332311
- Employees
- 78
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jul 11, 2018
- Abate by
- Aug 6, 2018
- Penalty
- Initial $4,837 · Current $3,380 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a)Harvard Integrations, LP at 27157 470th Avenue Tea, SD 57064: On and about and at times prior to March 27, 2018, the employer did not ensure employees were protected from cut and struck-by hazards. The electrical energy source was not isolated by lockout/tag-out prior to blade change-out being performed on the Hem-Saw Model # V100LA-3 SN: 869004 vertical band saw in the fabrication department. This condition exposed employees to cut and struck-by hazards.
Recent events (2)
- — I (S) $3380
- — Z (S) $4837
1910.147 C06 I
- Issued
- Jul 11, 2018
- Abate by
- Aug 6, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. (a)Harvard Integrations, LP at 27157 470th Avenue Tea, SD 57064: On and about and at times prior to March 27, 2018, the employer did not ensure employees were protected from cut and struck-by hazards in that, the employer did not perform an annual inspection of energy control procedures to ensure requirements and procedures were being followed. The electrical energy source was not isolated by lockout/tag-out prior to blade change-out being performed on the Hem-Saw Model #V100LA-3 SN: 869004 vertical band saw in the fabrication department. This condition exposed employees to cut and struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Jul 11, 2018
- Abate by
- Aug 6, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. (a)Harvard Integrations, LP at 27157 470th Avenue Tea, SD 57064: On or about and at times prior to March 27, 2018, the employer did not ensure employees were protected from cut and struck-by hazards in that, the employer did not ensure employees performing or assisting in maintenance activities associated with blade change-out on the Hem-Saw Model # V100LA-3 SN: 869004 vertical band saw, had received training as authorized employees. This condition exposed employees to cut and struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Jul 11, 2018
- Abate by
- Aug 6, 2018
- Penalty
- Initial $4,837 · Current $3,300 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The employer did not ensure points of operation of machinery were guarded to prevent employees from having any part of their body in the danger zones during operating cycles: (a)Harvard Integrations, LP at 27157 470th Avenue Tea, SD 57064: On or about and at times prior to March 27, 2018, the employer did not ensure employees were protected from cut and struck-by hazards in that, the blade guard on the Hem-Saw, Model # V100LA-3 SN: 869004 vertical band saw was not adjusted to cover the unused portion of the cutting blade. This condition exposed employees to cut and laceration hazards. (b)Harvard Integrations, LP at 27157 470th Avenue Tea, SD 57064: On or about and at times prior to March 27, 2018, the employer did not ensure employees were protected from cut and struck-by hazards in that, the Fabbrica Macchine Bergamo horizontal band saw was not equipped with a guard to cover the unused portion of the cutting blade. This condition exposed employees to cut and laceration hazards. (c)Harvard Integrations, LP at 27157 470th Avenue Tea, SD 57064: On or about and at times prior to March 27, 2018, the employer did not ensure employees were protected from amputation hazards in that, the Piranha P70 metal worker was not equipped with an adequate machine guard to reduce employee exposure to the point of operation of the punch press. This condition exposed employees to crushing hazards.
Recent events (2)
- — I (S) $3300
- — Z (S) $4837
1910.252 B02 III
- Issued
- Jul 11, 2018
- Abate by
- Aug 6, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.252(b)(2)(iii): The employer did not ensure workers or other persons adjacent to the welding areas were protected from the rays by noncombustible or flameproof screens or shields nor were they required to wear appropriate goggles: (a)Harvard Integrations, LP at 27157 470th Avenue Tea, SD 57064: On and about and at times prior to March 27, 2018, the employer did not ensure employees were protected from process radiation hazards from welding activities performed adjacent to the fabrication area by use of a welding curtain or other appropriate means. This condition exposed employees to injurious light radiation.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Harvard Integrations, LP
View Harvard Integrations, LP's full OSHA safety record →
More inspections in this industry (NAICS 332311)
More inspections in SD
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343044970.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.