GLENVIEW, IL —
OSHA Inspection: MAX CONSTRUCTION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MAX CONSTRUCTION, INC. in 632 BEAVER ROAD, GLENVIEW, IL 60025 (NAICS 238130). OSHA activity number 343104824.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MAX CONSTRUCTION, INC.
- Site address
- 632 BEAVER ROAD
- City
- GLENVIEW
- State
- IL
- ZIP
- 60025
- Mailing
- 940 N N.W. HWY #304, PARK RIDGE, IL 60068
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 3
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.1053 B13
- Issued
- Jun 4, 2018
- Abate by
- Jun 8, 2018
- Penalty
- Initial $3,658 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step: a) On or about April 23, 2018, employees were exposed to the hazard of falling where the top of a 6 foot step ladder was used as a step to access and egress top plates and rafters at an elevation of about 8 feet. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1400
- — Z (S) $3658
1926.102 A01
- Issued
- Jun 4, 2018
- Abate by
- Jun 8, 2018
- Penalty
- Initial $4,878 · Current $1,950 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection when machines or operations present potential eye or face injury from physical, chemical, or radiation agents: a) On or about April 23, 2018, employees were exposed to eye injury while operating pneumatic nail guns and electric saws without the benefit of eye protection. Max Construction, Inc., was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.102(a) which was contained in OSHA inspection number 1211652, citation 1, item 1, and was affirmed as a final order on April 5, 2017, with respect to a worksite located at 9646 Kildare, Skokie, Illinois. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (R) $1950
- — Z (R) $4878
1926.501 B13
- Issued
- Jun 4, 2018
- Abate by
- Jun 8, 2018
- Penalty
- Initial $8,536 · Current $3,370 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b): a) On or about April 23, 2018, employees were exposed to the hazard of falling approximately 16 feet from second story top plates to exterior grade while performing carpentry work without fall protection. b) On or about April 23, 2018, employees were exposed to the hazard of falling approximately 8 feet from second story top plates and rafters to a plywood deck while performing carpentry work without fall protection. Max Construction, Inc., was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(13) which was contained in OSHA inspection number 1211652, citation 1, item 2, and was affirmed as a final order on April 5, 2017, with respect to a worksite located at 9646 Kildare, Skokie, Illinois. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (R) $3370
- — Z (R) $8536
More inspections at MAX Construction, INC.
View MAX Construction, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343104824.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.