OSHA Inspection: NEWMARK MEDICAL COMPONENTS, INC.

Issued

2018-05-21 00:00:00

Penalty

Initial $5691.00 · Current $3600.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    WORKSHOP:  The following rotating collets of the Hardinge lathes were unguarded:     1.  Hardinge lathe; Super Precision.    2.  Hardinge lathe.

Issued

2018-05-21 00:00:00

Penalty

Initial $5691.00 · Current $3600.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections:    WORKSHOP: The flange and spindle end of the Brown & Sharpe surface grinder were unguarded.

Issued

2018-05-21 00:00:00

Abate by

2018-07-09 00:00:00

Penalty

Initial $5691.00 · Current $3800.00 Reduced

General-duty citation text

29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o):    WORKSHOP:  The inclined v-belt of the Brown & Sharpe surface grinder was unguarded.

Issued

2018-05-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, the identity of the workplace evaluated, the person certifying that the evaluation had been performed, and the date the hazard assessment was done:  WORKSHOP:  The employer had not verified through a written certification that the Workplace Hazard Assessment for personal protective equipment (PPE) had been performed as complete.