JACKSONVILLE, FL —
OSHA Inspection: GMH CONSTRUCTION, INC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of GMH CONSTRUCTION, INC. in 5000 BIG ISLAND DR., JACKSONVILLE, FL 32256 (NAICS 238140). OSHA activity number 343164182.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GMH CONSTRUCTION, INC.
- Site address
- 5000 BIG ISLAND DR.
- City
- JACKSONVILLE
- State
- FL
- ZIP
- 32256
- Mailing
- 725 KANAKEE LANE, ORLANDO, FL 32807
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 8
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.1153 C01
- Issued
- Aug 29, 2018
- Abate by
- Oct 17, 2018
- Penalty
- Initial $1,663 · Current $1,663
900090109015S900
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1: a. On or about May 14, 2018, in the jobsite at "5 Thousand Town Apartments" project, South wall of the East building, the employer failed to fully and properly implement the engineering controls and work practices described in Table 1, as the employees used a handheld angle grinder for uses other than mortar removal which included, but were not limited, to cut exterior walls decorative features made of concrete and metal mesh, without an integrated water delivery system and without a commercially available shroud and dust collection system for the protection of employees from airborne crystalline Silica dust.
Recent events (1)
- — Z (S) $1663
1926.1153 D02 I
- Issued
- Aug 29, 2018
- Penalty
- Initial $0 · Current $0
900090109015S900
General-duty citation text
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section: a. On or about May 14, 2018, in the jobsite at "5 Thousand Town Apartments" project, South wall of the East building, where the employer did not fully and properly implement the engineering controls and work practices described in Table 1, the employer failed to assess the employees' exposure to airborne crystalline Silica.
Recent events (1)
- — Z (S) $0
1926.1153 E01 II
- Issued
- Aug 29, 2018
- Abate by
- Oct 17, 2018
- Penalty
- Initial $0 · Current $0
900090109015S900
General-duty citation text
29 CFR 1926.1153(e)(1)(ii): Respiratory protection was not provided for tasks not listed in Table 1, or where the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection described in Table 1: a. On or about May 14, 2018, in the jobsite at "5 Thousand Town Apartments" project South wall of the East building, the employer did not required employees using a handheld DeWalt DWE402 angle grinder to cut concrete exterior building features to use respiratory protection. The employer had not fully and properly implement the engineering controls and work practices as described in Table 1.
Recent events (1)
- — Z (S) $0
1926.1153 G01
- Issued
- Aug 29, 2018
- Abate by
- Oct 17, 2018
- Penalty
- Initial $0 · Current $0
900090109015S900
General-duty citation text
29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan: a. On or about May 14, 2018, in the jobsite at "5 Thousand Town Apartments" project South wall of the East building, where the employer did not implement engineering and work practices control methods, the employer failed to fully and properly implement a written exposure control plan for the protection of the employees exposed to airborne crystalline Silica during demolition operations using a handheld angle grinder.
Recent events (1)
- — Z (S) $0
1926.1153 I01
- Issued
- Aug 29, 2018
- Abate by
- Oct 17, 2018
- Penalty
- Initial $0 · Current $0
900090109015S900
General-duty citation text
29 CFR 1926.1153(i)(1): The employer did not ensure that at least the following hazards were addressed: Cancer, lung effects, immune system effects, and kidney effects: a. On or about May 14, 2018, in the jobsite at "5 Thousand Town Apartments" project South wall of the East building, the employer failed to provide training to employees on the health hazards presented by the exposure to airborne Crystalline Silica to the employees conducting demolition operations that included using a DeWalt DWE402 handheld angle grinder to cut concrete, a task that could expose them to airborne Silica dust.
Recent events (1)
- — Z (S) $0
More inspections at GMH Construction, INC.
View GMH Construction, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343164182.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.