OSHA Inspection: ADJB CONSTRUCTION, LLC.

Issued

Mar 27, 2019

Abate by

May 1, 2019

Penalty

Initial $319 · Current $319

General-duty citation text

29 CFR 1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section.   The employer did not provide the Occupational Safety and Health Administration certification of abatement as required for SERIOUS Citation #1, Item #1 and REPEAT Citation #2, Item #1 issued 9/10/18 for the site located at 5905 W. 137th St., Overland Park, Kansas.   29 CFR 1903.19(c)(1) requires certification that the abatement of the above violation is completed.

Issued

Mar 27, 2019

Abate by

May 1, 2019

Penalty

Initial $319 · Current $319

General-duty citation text

29 CFR 1903.19(d)(1): The employer must submit to the Agency, along with the information on abatement certification required by paragraph (c)(3) of this section, documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.  The employer did not provide the Occupational Safety and Health Administration certification and documentation of abatement as required for REPEAT Citation #2, Item #2, issued 9/10/18 for site located at 505 W. 137th St., Overland Park, Kansas.  29 CFR 1903.19(d)(1) requires certification and documentation that the abatement of the above violation is complete.

Issued

Sep 10, 2018

Abate by

Dec 17, 2018

Penalty

Initial $3,049 · Current $1,525 Reduced

General-duty citation text

29 CFR 1926.403(b)(1): Employer did not ensure that electrical equipment is free from recognized hazards that are likely to cause death or serious physical harm to employees:    At the jobsite located at 5905 W 137th Street, Overland Park, Kansas, employees engaged in residential framing activities were exposed to electric shock hazards.  The outer insulation was compromised, exposing the conductors on the electrical cord providing power to the Skill brand worm drive circular saw.

Issued

Sep 10, 2018

Abate by

Dec 17, 2018

Penalty

Initial $15,244 · Current $7,622 Reduced

General-duty citation text

29 CFR 1926.102(a)(1): The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.    At the jobsite located at 5905 W 137th Street, Overland Park, Kansas, employees engaged in residential framing activities were exposed to struck-by hazards in that eye protection was not being used while operating pneumatic nail guns and when using the Skilsaw.    ADJB Construction, LLC. was previously cited for a violation of this occupational safety and health standard or its equivalent standard1926.102(a)(1), which was contained in OSHA inspection number 1159304, citation number 1, item number 1 and was affirmed as a final order on September 26, 2016, with respect to a workplace located at 9604 w 164th PL O, Overland Park, Kansas.    ADJB Construction, LLC. Was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.102(a)(1), which was contained in OSHA inspection number 1109367, citation number 1, item number 1 and was affirmed as a final order on February 26,2016, with respect to a workplace located at 9800W 163rd Street, Overland Park, Kansas.

Issued

Sep 10, 2018

Abate by

Dec 17, 2018

Penalty

Initial $42,682 · Current $21,341 Reduced

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):     At the jobsite located at 5905 W 137th Street, Overland Park, Kansas, employees engaged in residential framing activities were exposed to fall hazards of approximately 12 feet to the ground below in that fall protection was not used.    ADJB Construction, LLC. was previously cited for a repeat violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(13), which was contained in OSHA inspection number 1258860, citation number 1, item number 3 and was affirmed as final order on December 8, 2017, with respect to a workplace located at 8023 W 166th Terrace, Overland Park, KS 66085.    ADJB Construction, LLC. was previously cited for a repeat violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(13), which was contained in OSHA inspection number 1159304, citation number 1, item number 3 and was affirmed as a final order on September 26, 2016, with respect to a workplace located at 9604 W 164th PL O Overland Park KS 66129.    ADJB Construction, LLC. was previously cited for a repeat violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(13), which was contained in OSHA inspection number 1151688, citation number 2, item number 2 and was affirmed as a final order on September 26, 2016, with respect to a workplace located at 123515 W. 163rd Terrace, Overland Park KS 66221.    ADJB Construction, LLC. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(13), which was contained in OSHA inspection number 1109367, citation number 1, item number 3 and was affirmed as a final order on February 26,2016, with respect to a workplace located at 9800W 163rd Street Overland Park KS 66221.