JOHNSTOWN, OH —
OSHA Inspection: TRILLIUM FARM HOLDINGS, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of TRILLIUM FARM HOLDINGS, LLC in 11652 CLOVER VALLEY ROAD, JOHNSTOWN, OH 43031 (NAICS 112310). OSHA activity number 343424933.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TRILLIUM FARM HOLDINGS, LLC
- Site address
- 11652 CLOVER VALLEY ROAD
- City
- JOHNSTOWN
- State
- OH
- ZIP
- 43031
- Mailing
- 10513 CROTON RD., JOHNSTOWN, OH 43031
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 112310
- Employees
- 75
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.28 B01 I
- Issued
- Dec 6, 2018
- Abate by
- Dec 31, 2018
- Penalty
- Initial $12,934 · Current $0 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): (1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following: *Guardrail systems; *Safety net systems; *or Personal fall protection systems, such as personal fall arrest, travel restraint, or positioning systems. a. On or about August 17, 2018 in the Barn 30 Feed Bin Pad Area, an employee was exposed to a fall hazard while replacing a belt on a feed bin auger's drive motor on the roof's edge. The motor was approximately 16 feet above ground level and projected out approximately 2.5 feet from the unprotected edge of the roof.
Recent events (3)
- — D (S) $0
- — C (S) $12934
- — Z (S) $12934
1910.147 C07 I
- Issued
- Dec 6, 2018
- Abate by
- Jan 10, 2019
- Penalty
- Initial $12,934 · Current $12,934
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. a. On or about August 17, 2018 in the Barn 30 Feed Bin Pad Area, an employee was engaged in lockout/tagout activities such as de-energization and re-energization, while assisting in the replacement of a feed bin auger motor's drive belt. The employee had not received authorized employee training, but was required to perform authorized employee duties.
Recent events (3)
- — F (S) $12934
- — C (S) $12934
- — Z (S) $12934
1910.147 F03 II D
- Issued
- Dec 6, 2018
- Abate by
- Jan 10, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee shall affix a personal lockout or tagout device to the group lockout device, group lockbox, or comparable mechanism when he or she begins work, and shall remove those devices when he or she stops working on the machine or equipment being serviced or maintained. a. On or about August 17, 2018 in the Barn 30 Feed Bin Pad Area, employees were engaged in group lockout/tagout activities during the replacement of a feed bin auger motor's drive belt. The employer did not ensure that each employee affixed their own lockout device on the feed bin auger motor's lockout point.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.147 C04 I
- Issued
- Dec 6, 2018
- Abate by
- Jan 10, 2019
- Penalty
- Initial $12,934 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section. a. On or about August 17, 2018 in the Barn 30 Feed Bin Pad Area, employees were engaged in maintenance activities that required lockout/tagout, while replacing a feed bin auger motor's drive belt. The employer did not document or utilize any specific lockout/tagout procedures for the replacement of auger motor drive belts.
Recent events (3)
- — F (S) $0
- — C (S) $12934
- — Z (S) $12934
More inspections at Trillium Farm Holdings, LLC
View Trillium Farm Holdings, LLC's full OSHA safety record →
More inspections in this industry (NAICS 112310)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343424933.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.