SCHAUMBURG, IL —
OSHA Inspection: PIO CUSTOM CABINETRY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PIO CUSTOM CABINETRY, INC. in 1285 E. HIGGINS RD., SCHAUMBURG, IL 60173 (NAICS 238350). OSHA activity number 343460457.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PIO CUSTOM CABINETRY, INC.
- Site address
- 1285 E. HIGGINS RD.
- City
- SCHAUMBURG
- State
- IL
- ZIP
- 60173
- Mailing
- 1130 W. FULLERTON AVE., ADDISON, IL 60101
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238350
- Employees
- 2
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.304 F
- Issued
- Feb 6, 2019
- Abate by
- Feb 12, 2019
- Penalty
- Initial $3,334 · Current $1,667 Reduced
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws were not equipped with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) On or about September 12, 2018, an employee used a Hitachi Model No. C10FR table saw that was not equipped with a spreader when used to rip cut wood flooring and cabinetry.
Recent events (2)
- — I (S) $1667
- — Z (S) $3334
1926.304 F
- Issued
- Feb 6, 2019
- Abate by
- Feb 12, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws did not have non-kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) On or about September 12, 2018, an employee used a Hitachi C10FR table saw that was not equipped with non-kickback fingers or dogs when used to rip cut wood flooring and cabinetry.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.304 I01
- Issued
- Feb 6, 2019
- Abate by
- Feb 12, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(i)(1): Each circular hand-fed ripsaw was not guarded by a hood which completely enclosed that portion of the saw above the sable and that portion of the saw above the material being cut: a) On or about September 12, 2018, an employee used a Hitachi C10FR table saw that was not equipped with a blade guard to rip cut wood flooring and cabinetry.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at PIO Custom Cabinetry, INC.
View PIO Custom Cabinetry, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238350)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343460457.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.