Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SEMINOLE PRECAST MANUFACTURING, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of SEMINOLE PRECAST MANUFACTURING, INC. in 220 CARGILL ROAD CONNECTOR, MACON, GA 31216 (NAICS 327390). OSHA activity number 343468682.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Seminole Precast Manufacturing, INC. — free Get an email when a new federal OSHA severe-injury report for Seminole Precast Manufacturing, INC. is published. One employer, no account, unsubscribe in one click.
Site address
220 CARGILL ROAD CONNECTOR
City
MACON
State
GA
ZIP
31216
Mailing
220 CARGILL ROAD CONNECTOR, MACON, GA 31216
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327390
Employees
35
Ownership type
A

6 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 4 exposed
Issued
Feb 13, 2019
Abate by
Mar 12, 2019
Penalty
Initial $6,521 · Current $3,913 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees exposed to crush and struck-by hazards:  Seminole Precast Manufacturing, Inc., Macon, GA - Employees operated the 510 Yale sit down forklift without an operational seatbelt, on or about 9/17/18.
Recent events (2)
  • — I (S) $3912.6
  • — Z (S) $6521

1910.178 L01 I

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 13, 2019
Abate by
Mar 12, 2019
Penalty
Initial $6,521 · Current $3,913 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  Seminole Precast Manufacturing, Inc., Macon, GA - An employee assigned to operate forklifts daily did not receive training and certification as required by standard, on or about 9/17/18.
Recent events (2)
  • — I (S) $3912.6
  • — Z (S) $6521

1910.178 L04 III

Serious Gravity 1 1 instance 2 exposed
Issued
Feb 13, 2019
Abate by
Mar 12, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:  Seminole Precast Manufacturing, Inc., Macon, GA - Employees operating forklift received training and certification in 2012. An evaluation every 3 years had not been performed, on or about 9/17/18.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1053 G02

Serious Gravity 5 1 instance 6 exposed
Issued
Feb 13, 2019
Abate by
Apr 2, 2019
Penalty
Initial $6,521 · Current $4,175 Reduced

Hazardous substances 9000

29 CFR 1910.1053(g)(2): Where respirator use is required by this section, the employer did not institute a respiratory protection program in accordance with 29 CFR 1910.134.    Seminole Precast Manufacturing, Inc., Macon, GA - Employees performing duties such as but not limited to, patching, chipping, cutting and grinding, were required to wear N95 disposable respirators from protection against silica dust. A written respiratory protection program in accordance with the respirator standard 1910.134(c) had not been developed, on or about 10/10/18.
Recent events (2)
  • — I (S) $4174.8
  • — Z (S) $6521

1910.134 E01

Serious Gravity 5 1 instance 6 exposed
Issued
Feb 13, 2019
Abate by
Apr 2, 2019
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  Seminole Precast Manufacturing, Inc., Macon, GA - Employees performing duties such as but not limited to, patching, chipping, cutting and grinding, were required to wear N95 disposable respirators from protection against silica dust. A medical evaluation was not performed prior to require employees to wear the respirators, on or about 9/17/18.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 F01

Serious Gravity 5 1 instance 6 exposed
Issued
Feb 13, 2019
Abate by
Apr 2, 2019
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR 1910.134(f)(1): The employer shall ensure that employees using a tight-fitting facepiece respirator pass an appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT) as stated in this paragraph.  Seminole Precast Manufacturing, Inc., Macon, GA - Employees performing duties such as but not limited to, patching, chipping, cutting and grinding, were required to wear N95 disposable respirators from protection against silica dust. Fit testing was not performed prior to require employees to wear the respirators, on or about 9/17/18.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Seminole Precast Manufacturing, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343468682.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.