Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: IDEAL SYSTEMS USA, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of IDEAL SYSTEMS USA, INC. in 2711 COLUMBIA BLVD, BLOOMSBURG, PA 17815 (NAICS 238160). OSHA activity number 343557385.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ideal Systems USA, INC. — free Get an email when a new federal OSHA severe-injury report for Ideal Systems USA, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2711 COLUMBIA BLVD
City
BLOOMSBURG
State
PA
ZIP
17815
Mailing
70 NORTH SECOND STREET, STROUDSBURG, PA 18360
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
3
Ownership type
A

3 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 3 instances 3 exposed
Issued
Nov 30, 2018
Abate by
Jan 18, 2019
Penalty
Initial $2,772 · Current $1,940 Reduced
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:  a) Bloomsburg, PA: Employees did not wear eye protection while operating a circular saw, a reciprocating saw, and a pneumatic nail gun, on or about October 25, 2018.  ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1940.4
  • — Z (S) $2772

1926.501 B10

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 30, 2018
Abate by
Dec 12, 2018
Penalty
Initial $2,772 · Current $1,940 Reduced
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems:  a) Bloomsburg, PA: Employees performing roofing work on a motel structure with an eave height of approximately 8 feet above the ground were not protected form falling, on or about October 25, 2018.  ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1940.4
  • — Z (S) $2772

1926.1053 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 30, 2018
Penalty
Initial $2,772 · Current $1,940 Reduced
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  a) Rear of motel, Bloomsburg, PA: Employees were using a 16ft. extension ladder to access the roof of a structure and the ladder side rails only extended about 12 inches above the upper landing surface, exposing employees to injuries from a fall hazard, observed on or about October 25, 2018.  CERTIFICATION NOT REQUIRED CORRECTED DURING INSPECTION
Recent events (2)
  • — I (S) $1940.4
  • — Z (S) $2772

View Ideal Systems USA, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343557385.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.