Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HEARTLAND ENGINEERED PRODUCTS, LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of HEARTLAND ENGINEERED PRODUCTS, LLC in 355 INDUSTRIAL DRIVE, HARRISON, OH 45030 (NAICS 332312). OSHA activity number 343632980.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Heartland Engineered Products, LLC — free Get an email when a new federal OSHA severe-injury report for Heartland Engineered Products, LLC is published. One employer, no account, unsubscribe in one click.
Site address
355 INDUSTRIAL DRIVE
City
HARRISON
State
OH
ZIP
45030
Mailing
355 INDUSTRIAL DRIVE, HARRISON, OH 45030
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
95
Ownership type
A

6 citations on file for this inspection.

1910.107 B05 II

Serious Gravity 10 1 instance 95 exposed
Issued
Feb 5, 2019
Abate by
Mar 4, 2019
Penalty
Initial $9,282 · Current $4,641 Reduced

Hazardous substances 00400435044004601540

29 CFR 1910.107(b)(5)(ii): Discarded filter pads and filter rolls were not immediately removed to a safe, well-detached location or placed in a water-filled metal container and disposed of at the close of the day's operation when not maintained completely in water.    (a)  On or about November 30, 2018, the contaminated filters from the paint booths were placed in a dumpster inside the building, next to the paint booths, and were not in a water filled container when they caught fire.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $4641
  • — Z (S) $9282

1910.132 D01 I

Serious Gravity 5 1 instance 14 exposed
Issued
Feb 5, 2019
Abate by
Mar 4, 2019
Penalty
Initial $4,508 · Current $2,254 Reduced

Hazardous substances 0731152016209135

29 CFR 1910.132(d)(1)(i): The employer did not select and have each affected employee use, the types of personal protective equipment that would protect the affected employee(s) from the hazards identified in the hazard assessment:    (a)  Employees in the welding department were not required to wear face shields when grinding metal parts.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $2254
  • — Z (S) $4508

1910.132 D02

Serious Gravity 1 1 instance 95 exposed
Issued
Feb 5, 2019
Abate by
Apr 15, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment:    (a)  The employer stated that they had not completed a certification of hazard assessment as required by the standard.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.157 G01

Serious Gravity 10 1 instance 95 exposed
Issued
Feb 5, 2019
Abate by
Apr 30, 2019
Penalty
Initial $9,282 · Current $4,641 Reduced

Hazardous substances 00400435044015402460

29 CFR 1910.157(g)(1): An educational program was not provided for all employees to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting:    (a)  On or about November 30, 2018, employees who attempted to fight an incipient stage fire that involved flammable and combustible materials, such as but not limited to used paint booth filters, in a dumpster in the paint department were not provided with training on the general principles of fire extinguisher use or the hazards involved in incipient stage fire fighting.      In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $4641
  • — Z (S) $9282

1910.134 G01 I B

Other-than-serious 1 instance 1 exposed
Issued
Feb 5, 2019
Penalty
Initial $0 · Current $0

Hazardous substances 00400435044015402460

29 CFR 1910.134(g)(1)(i)(B): Respirators with tight-fitting facepieces were worn by employees with a condition that interfered with the face-to-facepiece seal or valve function:    (a)  On December 3, 2018, an employee in the paint booth was observed wearing a tight fitting respirator with the straps over the top of a ball cap that he was wearing.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.157 E03

Other-than-serious 1 instance 95 exposed
Issued
Feb 5, 2019
Abate by
Mar 25, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check:    (a)  On December 12, 2018, a fire extinguisher in the welding area was observed with a tag containing an inspection date of January 2017.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Heartland Engineered Products, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343632980.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.