SAINT LOUIS, MO —
OSHA Inspection: KOKEN MANUFACTURING COMPANY INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of KOKEN MANUFACTURING COMPANY INC. in 1631 DR. MARTIN LUTHUR KING DRIVE, SAINT LOUIS, MO 63106 (NAICS 337127). OSHA activity number 343678488.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KOKEN MANUFACTURING COMPANY INC.
- Site address
- 1631 DR. MARTIN LUTHUR KING DRIVE
- City
- SAINT LOUIS
- State
- MO
- ZIP
- 63106
- Mailing
- 1631 DR. MARTIN LUTHUR KING DRIVE, SAINT LOUIS, MO 63106
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337127
- Employees
- 29
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C01
- Issued
- Jan 18, 2019
- Abate by
- Mar 8, 2019
- Penalty
- Initial $5,174 · Current $2,587 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury: At 1631 Dr. Martin Luther King Drive, St. Louis, Missouri, the employer did not establish a written lockout/tagout program for machinery such as the McClain Epco Vertical Baler, m/n E-11, s/n 11EPE08993042AD. This violation was noted on 01/08/19.
Recent events (2)
- — I (S) $2587
- — Z (S) $5174
1910.147 C04 II
- Issued
- Jan 18, 2019
- Abate by
- Mar 8, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following: At 1631 Dr. Martin Luther King Drive, St. Louis, Missouri, the employer did not establish specific procedures for the safe and orderly shut down of machinery such as the McClain Epco Vertical Baler, m/n E-11, s/n 11EPE08993042AD. This violation was noted on 01/08/19.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I A
- Issued
- Jan 18, 2019
- Abate by
- Mar 8, 2019
- Penalty
- Initial $5,174 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): The employer did not provide adequate training to ensure that employees required the knowledge and skills required for the safe application, usage, and removal of energy control devices. At 1631 Dr. Martin Luthur King Drive, St. Louis, Missouri, the authorized employees were unaware of the requirement for an overall, written program, specific lockout/tagout procedures, and the application of appropriate devices.
Recent events (2)
- — I (S) $0
- — Z (S) $5174
1910.147 D04 I
- Issued
- Jan 18, 2019
- Abate by
- Mar 8, 2019
- Penalty
- Initial $5,174 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: At 1631 Dr. Martin Luther King Drive, St. Louis, Missouri, authorized employees did not apply suitable lockout devices to effectively isolate the pneumatics powering machinery such as, but not limited to, the Morbidelli CNC Cutting Machine, m/n A-504, s/n AL-4514. This violation was noted on 01/08/19.
Recent events (2)
- — I (S) $0
- — Z (S) $5174
1910.212 A01
- Issued
- Jan 18, 2019
- Abate by
- Mar 8, 2019
- Penalty
- Initial $5,174 · Current $2,587 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: At 1631 Dr. Martin Luther King Drive, St. Louis, Missouri, 01/08/19, specifically inside of the Maintenance Department, the rotating parts belonging to the following machines were unguarded: a/ Turner Lathe, m/n B102, s/n 14305. b/ Circular Sander, unknown make, model, or serial number.
Recent events (2)
- — I (S) $2587
- — Z (S) $5174
More inspections at Koken Manufacturing Company INC.
View Koken Manufacturing Company INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337127)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343678488.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.