HAUPPAUGE, NY —
OSHA Inspection: POLY CRAFT INDUSTRIES CORP.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of POLY CRAFT INDUSTRIES CORP. in 40 RANICK ROAD, HAUPPAUGE, NY 11788 (NAICS 326111). OSHA activity number 343684031.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- POLY CRAFT INDUSTRIES CORP.
- Site address
- 40 RANICK ROAD
- City
- HAUPPAUGE
- State
- NY
- ZIP
- 11788
- Mailing
- 40 RANICK ROAD, HAUPPAUGE, NY 11788
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326111
- Employees
- 46
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jun 6, 2019
- Abate by
- Jul 2, 2019
- Penalty
- Initial $9,282 · Current $6,033 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Worksite, 40 Ranick Road, Hauppauge, NY - Employees were required to perform minor repairs and maintenance on a Century-Tech CT-9500 Split Roll Dual Servo Bag Machine, powered by energy sources such as, but not limited to, electrical, thermal and pneumatic components, was neither provided with nor utilizing energy control procedures; on or about 12/11/2018. Note: In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (3)
- — F (S) $6033.3
- — C (S) $9282
- — Z (S) $9282
1910.147 C05 I
- Issued
- Jun 6, 2019
- Abate by
- Jul 2, 2019
- Penalty
- Initial $9,282 · Current $6,033 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources: a) Worksite, 40 Ranick Road, Hauppauge, NY - An employee was required to perform minor repairs and maintenance on a Century-Tech CT-9500 Split Roll Dual Servo Bag Machine, powered by energy sources such as, but not limited to, electrical, thermal and pneumatic components and not provided with energy isolating devices; on or about 12/11/2018. Note: In addition to abatement certification, the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (3)
- — F (S) $6033.3
- — C (S) $9282
- — Z (S) $9282
1910.147 C07 I A
- Issued
- Jun 6, 2019
- Abate by
- Jul 2, 2019
- Penalty
- Initial $6,630 · Current $4,310 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolate. a) Worksite, 40 Ranick Road, Hauppauge, NY: Employees authorized to perform maintenance and repair work on a Century-Tech CT-9500 Split Roll Dual Servo Bag Machine powered by energy sources such as, but not limited to, electrical, thermal and pneumatic components, were not provided with adequate training on utilizing energy control procedures; on or about 12/11/2018. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (3)
- — F (S) $4309.5
- — C (S) $6630
- — Z (S) $6630
1904.39 A02
- Issued
- Jun 6, 2019
- Penalty
- Initial $6,630 · Current $4,310 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer failed to report the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, within (24) twenty-four hours: a) Worksite, 40 Ranick Road, Hauppauge, NY: An employee was hospitalized as a result of an unreported worksite incident which resulted in an amputation of the tip of the right pinky finger; on or about 12/11/2018. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (3)
- — F (O) $4309.5
- — C (O) $6630
- — Z (O) $6630
More inspections at Poly Craft Industries Corp.
View Poly Craft Industries Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 326111)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343684031.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.