LANSDALE, PA —
OSHA Inspection: FOX BINDERY, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of FOX BINDERY, INC. in 2750 MORRIS ROAD, LANSDALE, PA 19446 (NAICS 323117). OSHA activity number 343709382.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FOX BINDERY, INC.
- Site address
- 2750 MORRIS ROAD
- City
- LANSDALE
- State
- PA
- ZIP
- 19446
- Mailing
- 2750 MORRIS ROAD, LANSDALE, PA 19446
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323117
- Employees
- 108
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Apr 25, 2019
- Penalty
- Initial $6,159 · Current $4,516 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Bailer Room Work Area: On or about January 11, 2019, employees perform machine maintenance and or repairs on an auger screw conveyor, however, procedures have not been developed, documented and utilized for the control of potentially hazardous energy.
Recent events (2)
- — I (S) $4516
- — Z (S) $6159
1910.147 C06 I
- Issued
- Apr 25, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Bailer Room Work Area: On or about January 10, 2019, employees perform machine maintenance and or repairs on an auger screw conveyor, however, periodic inspection of the energy control procedure are not being accomplished at least every 12 months.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Apr 25, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices: a) Bailer Room Work Area: On or about January 10, 2019, employees perform machine maintenance and or repairs on an auger screw conveyor, however, the employer does not provide training to ensure that the purpose and function of the energy control program are understood by employees.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 D01
- Issued
- Apr 25, 2019
- Penalty
- Initial $4,927 · Current $3,284 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) The Production Work Area: On or about January 10, 2019, an employee used a Bridgeport Milling Machine which had an unguarded pulley that was located less than 7 feet from the floor or working platform.
Recent events (2)
- — I (S) $3284
- — Z (S) $4927
1910.219 E01 I
- Issued
- Apr 25, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: a) The Production Work Area: On or about January 10, 2019, an employee used a Bridgeport Milling Machine which had an unguarded pulley that was located less than 7 feet from the floor or working platform.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at FOX Bindery, INC.
View FOX Bindery, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 323117)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343709382.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.