PLANO, TX —
OSHA Inspection: MCDOWELL PACKAGING & ADVERTISING CO, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MCDOWELL PACKAGING & ADVERTISING CO, INC in 2700 E PLANO PKWY, PLANO, TX 75074 (NAICS 323111). OSHA activity number 343727210.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MCDOWELL PACKAGING & ADVERTISING CO, INC
- Site address
- 2700 E PLANO PKWY
- City
- PLANO
- State
- TX
- ZIP
- 75074
- Mailing
- 2700 E PLANO PKWY, PLANO, TX 75074
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323111
- Employees
- 57
- Ownership type
- A
Citations
5 citations on file for this inspection.
1903.19 C01
- Issued
- Jul 1, 2021
- Abate by
- Jul 30, 2025
- Penalty
- Initial $767 · Current $0 Reduced
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: On or about January 5, 2021 McDowell Packaging & advertising Co, Inc. did not submit abatement certification within 10 calendar days from the specified abatement due date.
Recent events (3)
- — F (O) $0
- — C (O) $767
- — Z (O) $767
1910.147 C04 II B
- Issued
- Mar 1, 2019
- Abate by
- Mar 27, 2019
- Penalty
- Initial $9,282 · Current $13,260
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. a) On or about January 17, 2019, and times prior employees were exposed to a caught in hazard by not having specific procedures on the control of potentially hazardous energy when setting up the printing press MPS, OMET, RP-10, RP-8, GH-8. GH-10-2 in the production area. b) On or about January 17, 2019, and times prior employees were exposed to a caught in hazard by not having specific procedures on the control of potentially hazardous energy when setting up the all seem inspector machine in the production area. c) On or about January 17, 2019, and times prior employees were exposed to a caught in hazard by not having specific procedures on the control of potentially hazardous energy when setting up the Servo Auto cutting machine.
Recent events (3)
- — F (O) $13260
- — C (S) $9282
- — Z (S) $9282
1910.147 C06 I
- Issued
- Mar 1, 2019
- Abate by
- Mar 27, 2019
- Penalty
- Initial $9,282 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. On or about January 17, 2019, and times prior employer did not conduct annual periodic inspection on energy control procedures to ensure the requirements of this standard are being fallowed.
Recent events (3)
- — F (O) $0
- — C (S) $9282
- — Z (S) $9282
1910.147 C07 I
- Issued
- Mar 1, 2019
- Abate by
- Mar 27, 2019
- Penalty
- Initial $9,282 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following: a)On or about January 17, 2019, and times prior employees were exposed to a caught in hazard by not being trained on energy control program when setting up or un-jamming the printing press MPS, OMET, RP-10, RP-8, GH-8. GH-10-2 in the production area. b)On or about January 17, 2019, and times prior employees were exposed to a caught in hazard by not being trained on energy control program when setting up or un-jamming all seem inspector machine in the production area.
Recent events (3)
- — F (O) $0
- — C (S) $9282
- — Z (S) $9282
1910.219 C02 I
- Issued
- Mar 1, 2019
- Abate by
- Mar 27, 2019
- Penalty
- Initial $9,282 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, shall be protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top or sides and bottom of shafting as location requires. On or about January 17, 2019, and times prior employees were exposed to a caught in hazard by not having a horizontal shaft guarded on all seamers, Re-reeling and Doctor Machine and ACCRASEAM model AS12 in the production area.
Recent events (3)
- — F (S) $0
- — C (S) $9282
- — Z (S) $9282
More inspections at Mcdowell Packaging & Advertising CO, INC
View Mcdowell Packaging & Advertising CO, INC's full OSHA safety record →
More inspections in this industry (NAICS 323111)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343727210.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.