Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: U.S. BRONZE FOUNDRY AND MACHINE, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of U.S. BRONZE FOUNDRY AND MACHINE, INC. in 18649 BRAKE SHOE ROAD, MEADVILLE, PA 16335 (NAICS 333511). OSHA activity number 343802054.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch U.S. Bronze Foundry and Machine, INC. — free Get an email when a new federal OSHA severe-injury report for U.S. Bronze Foundry and Machine, INC. is published. One employer, no account, unsubscribe in one click.
Site address
18649 BRAKE SHOE ROAD
City
MEADVILLE
State
PA
ZIP
16335
Mailing
18649 BRAKE SHOE ROAD, MEADVILLE, PA 16335
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333511
Employees
45
Ownership type
A

4 citations on file for this inspection.

1910.147 D04 I

Other-than-serious 1 instance 2 exposed
Issued
Aug 16, 2019
Abate by
Sep 12, 2019
Penalty
Initial $5,304 · Current $5,000 Reduced
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:    A.)  U.S. Bronze Foundry and Machine, Inc., 18649 Brake Shoe Road, Meadville, PA  16335, on or about February 18, 2019 and times prior thereto:  Employees were performing service and maintenance work on the Bullard 66" Cutmaster mill (machine #1868).  The authorized employees did not affix an energy isolating device to the electrical disconnect.
Recent events (2)
  • — I (O) $5000
  • — Z (S) $5304

1910.147 F03 II

Other-than-serious 1 instance 2 exposed
Issued
Aug 16, 2019
Abate by
Sep 12, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.147(f)(3)(ii): Group lockout or tagout devices were not used in accordance with procedures required by 29 CFR 1910.147(c)(4):    A.)  U.S. Bronze Foundry and Machine, Inc., 18649 Brake Shoe Road, Meadville, PA  16335, on or about February 18, 2019 and times prior thereto:  Employees were performing service and maintenance work on the Bullard 66" Cutmaster mill (machine #1868).  The authorized employees did not affix energy isolating devices to the electrical disconnect.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.147 C06 I

Other-than-serious 1 instance 3 exposed
Issued
Aug 16, 2019
Abate by
Oct 31, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:    A.)  U.S. Bronze Foundry and Machine, Inc., 18649 Brake Shoe Road, Meadville, PA  16335, on or about February 18, 2019 and times prior thereto:  Employees were performing service and maintenance work on equipment including, but not limited to, the Bullard 66" Cutmaster mill (machine #1868).  The employer did not perform periodic inspections of the energy control procedures.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.184 C09

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Aug 16, 2019
Abate by
Sep 12, 2019
Penalty
Initial $7,956 · Current $0 Reduced
29 CFR 1910.184(c)(9): Employee(s) were not kept clear of load(s) suspended, or about to be lifted by sling(s):  A.)  U.S. Bronze Foundry and Machine, Inc., 18649 Brake Shoe Road, Meadville, PA  16335, on or about February 18, 2019 and times prior thereto:  Employees were lifting a hydraulic counter balance cylinder via a crane and nylon sling from a Bullard 66" Cutmaster mill (machine #1868).  The nylon sling failed causing the hydraulic counter balance cylinder to fall, crushing an employee's right hand.
Recent events (2)
  • — I (S) $0
  • — Z (S) $7956

View U.S. Bronze Foundry and Machine, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343802054.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.